Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

EAS Module not Communicating
Post Reply  Down to end
Page 1 of 1
CadillacWill
 


Member Since: 12 Apr 2017
Location: Oshkosh, WI
Posts: 2

United States 2005 LR3 4.4 V8 SE Auto Adriatic BlueLR3
EAS Module not Communicating

Hello All,

Fairly new LR owner here and looking for some advice. When I bought the vehicle it had the common Christmas tree of lights, however a new battery, brake switch and TC ECU fixed most of it. My final code is a "Suspension Fault."

I took it to the dealership to get the code read and they informed me the EAS Module is not Communicating with the vehicle. Their suggestion was start with a new $800 module... This is also shown by the center console switch not having any of the heights lit up. The switch also will not raise or lower the vehicle. Also all fuses were replaced in case of hairline fractures. This had no affect.

It also has an intermittent "transmission fault" which will lower the LR to access mode. After shutting down and restarting the vehicle it returns to standard ride height.

I am unsure what the problem is now and I'd prefer to not throw parts at this so any further suggestions on what to check would be much appreciated.
  
Post #180820926th Apr 2017 6:30 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site