Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > General

Help car back after having recon engine replacement
Post Reply  Down to end
Page 1 of 2 12>
tafa
 


Member Since: 03 Sep 2013
Location: Herts
Posts: 57

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Barolo BlackDiscovery 3
Help car back after having recon engine replacement

Can anyone help? Got my car back after having the engine replaced (disco 3 2005 diesel).
Before it went for repair the only fault the car had was intermittent suspension fault (orange suspension light) which was proved to be the compressor (I brought a compressor service kit but didn't get round to using it as it was only intermittent)
The car comes back with a constant red suspension fault on display.... so I repair the compressor with the service kit and my friend resets the fault codes only for them to instantly come back with the red suspension fault to reappear. The suspension works up and down fine? Is the car in calibration mode? Please help
Oh and the fault codes are C1A18 And C1A00.
I am waiting for the garage to call today to see If they tried to calibrate it.
Also they the dethreaded the coolant expansion tank bleed screw (found coolant leaking), so I ordered a new one which arrived but doesn't fit as it is larger with a larger thread. (Any ideas why it's different in size).
Thanks
  
Post #180268412th Apr 2017 7:55 am
View user's profile Send private message View poster's gallery Reply with quote
tafa
 


Member Since: 03 Sep 2013
Location: Herts
Posts: 57

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Barolo BlackDiscovery 3

Ok so they are sending me a replacement new coolant tank as it's old and you can't get replacement bleed screws apparently.
Any help with the suspension fault??
I've reset the fault codes today and they instantly come back as the compressor runs...
Fault codes:
Ride level control module
C1A13 pops up as soon as you try to raise
C1A00 pops up straight after reset
C1A18 pops up intermittent
Any help would be much appreciated Big Cry
  
Post #180407516th Apr 2017 11:18 am
View user's profile Send private message View poster's gallery Reply with quote
tafa
 


Member Since: 03 Sep 2013
Location: Herts
Posts: 57

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Barolo BlackDiscovery 3

Any one?
  
Post #180447017th Apr 2017 12:22 pm
View user's profile Send private message View poster's gallery Reply with quote
Mogwyth
 


Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976

Wales 2005 Discovery 3 4.4 V8 HSE Auto Zambezi SilverDiscovery 3

tafa wrote:
Ok so they are sending me a replacement new coolant tank as it's old and you can't get replacement bleed screws apparently.
Any help with the suspension fault??
I've reset the fault codes today and they instantly come back as the compressor runs...
Fault codes:
Ride level control module
C1A13 pops up as soon as you try to raise -
C1A00 pops up straight after reset
C1A18 pops up intermittent
Any help would be much appreciated Big Cry


These are all incomplete codes, the only C1A13 is:



There are 5 C1A00 codes, which range from low battery voltage to system not calibrated.

C1A18:
 ==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
 
 
Post #180447617th Apr 2017 12:55 pm
View user's profile Send private message View poster's gallery Reply with quote
tafa
 


Member Since: 03 Sep 2013
Location: Herts
Posts: 57

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Barolo BlackDiscovery 3

Thanks for the help...
My friend only has a cheap fault code reader (using laptop)
Ok so maybe if I replaced the reservoir valve block which comes with the pressure sensor that would eliminate most of the possibilities.
I've fitted a new battery, so not that.
  
Post #180448417th Apr 2017 1:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Skynet
 


Member Since: 23 Jul 2014
Location: Melksham, Wiltshire
Posts: 868

United Kingdom 2016 Discovery 4 3.0 SDV6 SE Auto Alaska WhiteDiscovery 4

Have they trapped an airline when refitting the engine?
 Dave
D3 2006 HSE, Cairns Blue - gone
D4 2016 SE, White

Wessex 4x4 Response
http://www.wessex4x4response.org.uk/ 
 
Post #180448517th Apr 2017 1:25 pm
View user's profile Send private message View poster's gallery Reply with quote
tafa
 


Member Since: 03 Sep 2013
Location: Herts
Posts: 57

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Barolo BlackDiscovery 3

This is what I'm worried about... Big Cry
When it went for repair of the engine it only had an intermittent orange suspension fault and was diagnosed to be the compressor dryer etc
They call me to ask if the suspension has a fault and I was honest and said yes it needs a new compressor or dryer.
Then arrives back from having the engine replaced with a red suspension fault with the compressor cover removed and in the car?
So I'm guessing they had a look at it before they called me.
  
Post #180448817th Apr 2017 1:30 pm
View user's profile Send private message View poster's gallery Reply with quote
tafa
 


Member Since: 03 Sep 2013
Location: Herts
Posts: 57

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Barolo BlackDiscovery 3

Mogwyth wrote:
tafa wrote:
Ok so they are sending me a replacement new coolant tank as it's old and you can't get replacement bleed screws apparently.
Any help with the suspension fault??
I've reset the fault codes today and they instantly come back as the compressor runs...
Fault codes:
Ride level control module
C1A13 pops up as soon as you try to raise -
C1A00 pops up straight after reset
C1A18 pops up intermittent
Any help would be much appreciated Big Cry


These are all incomplete codes, the only C1A13 is:



There are 5 C1A00 codes, which range from low battery voltage to system not calibrated.

C1A18:


Mogwyth what about fault code C1A00?
I've just got the car to raise to off road, cleared the fault codes and C1A00 appeared straight away. Any ideas what this one means
Thanks for your help
  
Post #180453817th Apr 2017 4:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10361

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

owww.

Where do you get that nice, detailed fault code list from ? Razz
  
Post #180457117th Apr 2017 5:28 pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72777

Ukraine 

BAS Automotive website. Thumbs Up
   
Post #180459017th Apr 2017 6:08 pm
View user's profile Send private message View poster's gallery Reply with quote
Mogwyth
 


Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976

Wales 2005 Discovery 3 4.4 V8 HSE Auto Zambezi SilverDiscovery 3

tafa wrote:

Mogwyth what about fault code C1A00?
I've just got the car to raise to off road, cleared the fault codes and C1A00 appeared straight away. Any ideas what this one means
Thanks for your help


Covers a multitude of things,

 ==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
 
 
Post #180463617th Apr 2017 7:47 pm
View user's profile Send private message View poster's gallery Reply with quote
Mogwyth
 


Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976

Wales 2005 Discovery 3 4.4 V8 HSE Auto Zambezi SilverDiscovery 3

Pete K wrote:
owww.

Where do you get that nice, detailed fault code list from ? Razz


A friend! Wink
 ==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
 
 
Post #180464117th Apr 2017 7:51 pm
View user's profile Send private message View poster's gallery Reply with quote
tafa
 


Member Since: 03 Sep 2013
Location: Herts
Posts: 57

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Barolo BlackDiscovery 3

Mogwyth wrote:
tafa wrote:

Mogwyth what about fault code C1A00?
I've just got the car to raise to off road, cleared the fault codes and C1A00 appeared straight away. Any ideas what this one means
Thanks for your help


Covers a multitude of things,



Could you post a clearer picture please as this is the fault code that is permanent and causing the red warning.
Think I need to invest in an iidtool bt any recommendations to where to buy from the cheapest site? Thanks
  
Post #180465917th Apr 2017 8:18 pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72777

Ukraine 

Group buy going at the mo. http://www.disco3.co.uk/forum/topic158440.html
   
Post #180466117th Apr 2017 8:21 pm
View user's profile Send private message View poster's gallery Reply with quote
tafa
 


Member Since: 03 Sep 2013
Location: Herts
Posts: 57

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Barolo BlackDiscovery 3

Thanks dsl Thumbs Up
  
Post #180466817th Apr 2017 8:30 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site