Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976
try this
==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
17th Apr 2017 7:39 pm
tafa
Member Since: 03 Sep 2013
Location: Herts
Posts: 55
Thanks
17th Apr 2017 7:52 pm
Apache
Member Since: 16 Oct 2011
Location: Yorkshire
Posts: 691
Realistically I'd be amazed if you didn't need a new compressor. I suspect it's finally failed coincidentally now. The repair kits generally don't seem to fix a lot of problem compressors.
17th Apr 2017 11:33 pm
tafa
Member Since: 03 Sep 2013
Location: Herts
Posts: 55
It May well be the compressor but what is strange is it wasn't a constant red fault before it went for engine repair and had different fault codes. Do these fault codes being read now relate to a compressor being faulty?
18th Apr 2017 6:49 am
tafa
Member Since: 03 Sep 2013
Location: Herts
Posts: 55
I decided to purchase an Iddtool bt tool and read the faults...
Same fault codes as read by my friends cheaper tool.
So then I go to suspension service/test and select "Set Normal Tolerance" and all sorted, no fault codes and no red or orange suspension warning.
I've been using/testing the suspension for a week now with no faults. So my hunch was right the garage had it in calibration or tight tolerance mode and my compressor service repair kit worked.
Mogwyth Thanks for your detailed fault code list as it was C1A0054 when read with the Iddtool
Hi.
You wrote the car got a new Engine/meaning Air Compressor, and the cover wasn't mounted back on.
Is it, that it was a different compressor type (amk, not hitachi/dunlop)?
That would be the reason the cover is not fitting.
And if it is so, it could be the reason that the car is not working well together wit the different compressor version (replacement of relay and adjustment in ccf needed...)
Or did You already checked this issue?TDV6MY07-automatic-LHD-noDPF-iidbt-ffrrMod
9th May 2017 4:37 am
tafa
Member Since: 03 Sep 2013
Location: Herts
Posts: 55
tafa wrote:
I decided to purchase an Iddtool bt tool and read the faults...
Same fault codes as read by my friends cheaper tool.
So then I go to suspension service/test and select "Set Normal Tolerance" and all sorted, no fault codes and no red or orange suspension warning.
I've been using/testing the suspension for a week now with no faults. So my hunch was right the garage had it in calibration or tight tolerance mode and my compressor service repair kit worked.
Mogwyth Thanks for your detailed fault code list as it was C1A0054 when read with the Iddtool
Markland read my above post I already found the fault.... the garage had it in calibration/tight tolerance mode
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum