Hi all I praying one of you clever lot can help me. What it is I've brought a second hand heated leather seat base drivers side as mine burnt a hole in right hand side burning my right thigh. Anyway the new one came good condition. However the new one had 2 plugs both with 2 wires each. But the old one I've just taken out had 1 plug with 2 wires & 1 plug with 4 wires. And none of plugs fit 🙁 can anyone advise if I can splice new wires onto old plugs some how?
Click image to enlarge
Any help would be much appreciated 😉😉😉
28th Mar 2017 8:24 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Possibly passenger side seat base with occupancy sensor?
Good thinking there's slight wear on left hand side bolster. So makes me think that could be the problem. Does the drivers seat have extra features? That's y more wires?
Sorted. The jumper wire threw me. All I need to do is joint live , earth wires & occupancy wires then solder & heat shrink so there is only 4 wires but 1 jumper wire.
Well just spoke to my mate at dls & said that's a passenger side seat as one of you good fellas said. Apparently passenger seat has 2 wires for heater element & 2 wires for occupancy sensor. The drivers seat don't have occupancy sensors the small white sensor wire is the thermostat apparently. We'll just spoken to the 4x4 breaker & he has sent the passenger seat by mistake. So send it back & swap it. 😥😣😥
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum