NoDo$h
Member Since: 02 May 2006
Location: Finding new and exciting ways to milk badgers.
Posts: 19689
|
Raptor coating is the business. Spent Saturday morning with my compressor and a Schutz gun sprayin over the new floor I fitted in my livestock trailer. Goes on a dream, hard as nails, looks the business.
Make sure you wear a decent A1P3 mask and goggles. Ideally a ventilator hood. The thinners are ferocious!
|
 19th Sep 2017 8:26 pm |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
  
|
Downsman wrote:Thanks for that, can the pipes be safely moved 1/2 inch so that they don't foul the sliders? Or are they fixed in position?
The pipes are held to the inner sill by p-clips, Im not sure if you can reposition the pipes, but removing the p-clip fixings and having a little wiggle might tell you if its possible?
Iirc the air tank has to come off for access to the p-clip fixings, but Im not 100 percent as it was over two yrs ago I replaced the pipes.
The pipes are alloy not steel, the two pipes on the inner sill are 150 quid for the pair, so be careful.
|
| 20th Sep 2017 7:47 am |
|
|
