Member Since: 01 Nov 2013
Location: Mellieha
Posts: 66
Air suspension will not lower
The air suspension will not lower as though there is an obstacle and will automatically rise to max height. The SDD reads a fault saying suspension valve. Since this happened after changing the 2 front air springs I suspected it would be the front air valve but changing it did not help..... any ideas anyone please
5th Apr 2017 9:06 pm
anjo14
Member Since: 27 Apr 2012
Location: Lanarkshire
Posts: 562
We have the same issue after front air struts replaced and rear upper arms also replaced. When parked up when selecting access height it will raise to extended height and info will say drive off from obstruction and the same for offroad height to normal height. Have done a height calibration but made no difference. Apparently when moving it works as normal and can select access and offroad with no issues. We have 4 brand new height sensors and have changed the front so far but the new front RH sensor is showing a fault which is pointing to maybe corrosion on the sensor plug. Once we have changed out the rear sensors then will I know if it is the newness of front air strut maybe not deflating or inflating at same rate as rears. We have also change the front valve block prior to front air strut being replaced.D3 TDV6 S MY2005
5th Apr 2017 9:25 pm
lronly
Member Since: 01 Nov 2013
Location: Mellieha
Posts: 66
Thank you for your input.....i have changed loads of air springs in the past and never had this problem before......
5th Apr 2017 10:01 pm
lronly
Member Since: 01 Nov 2013
Location: Mellieha
Posts: 66
Is there anyone else with a similar problem?
6th Apr 2017 8:39 am
lronly
Member Since: 01 Nov 2013
Location: Mellieha
Posts: 66
its a blocked dryer
7th Apr 2017 3:40 pm
anjo14
Member Since: 27 Apr 2012
Location: Lanarkshire
Posts: 562
Assumed you have diagnosed it being a blocked dryer and relaced the dessicant and fault has cleared.D3 TDV6 S MY2005
9th Apr 2017 7:31 pm
Madmax99
Member Since: 05 Apr 2017
Location: Wakefield
Posts: 8
My D3 was exactly the same and would never lower or vent correctly and constantly bringing a fault up so contacted the guy who i bought it off and he'd fitted the latest AMK pump but not upgraded the software....25 pound at my local indy now running perfect, hope this helps
10th Apr 2017 4:13 pm
PeterTh
Member Since: 06 Sep 2013
Location: Alunda
Posts: 330
I had this phenomenon occasionally but it disappeared as soon as I changed the drying beads and filters in the dryer. I also got the "venting gallery" warning from time to time.
//Peter2011 Discovery 4 3.0 TDV6 S Automatic
1999 Discovery 2 V8 ES Automatic
Earlier
2006 Discovery 3 TDV6 SE Automatic
1996 Discovery 300 Tdi ES Automatic
1975 Series 3 2.25 diesel
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum