Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
OSRAM Foglight/DRL installation question
For those of us who have installed the fog / DRL OSRAM.
Is it necessary to enlarge the hole / seat at the base of the bracket made in the bumper?
This is because the headlights Osram have the bottom slightly wider than the original (they are 90 mm cylindrical, the original has the bottom slightly smaller) and not go through.
Pics will be very appreciatedDiscovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition
IID Pro MV License
9th Mar 2017 12:49 am
cosmic329
Member Since: 17 Dec 2013
Location: Chichester
Posts: 177
Some have cut the hole slightly to widen (see http://disco4.com/forum/topic102948.html?h...;start=30) but I did not when I fitted mine. I found that if I pushed the light in at an angle and then turned it once through I could get all 3 mounting screws in without a problem. It was quite tight but ok. I removed them and put them back several times to adjust the light level for the foglight (there is a level screw on the back that you cannot get to easily unless you take the light out. Discovery 4 SDV6 HSE '65 - Projects in planning phase!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum