Evening guys, need some help please, had the rear upper wishbones changed over Christmas, and after about 3 weeks started throwing suspension fault amber light on. Switch engine off and then back on and fault cleared, had codes read and it said right and left suspension sensor error. Mechanic clear faults and tried to make it fault but it would not, car sits level, through fault again on way home tonight, checked 4X4 info screen and it showed rear right wheel lower than the others with a red light under the wheel flashing. Added photo of info screen, do I need suspension calibrated, new sensor? need your expert advice please.
1st Mar 2017 8:28 pm
Alan B
Member Since: 12 Feb 2013
Location: Fife
Posts: 6528
Had exactly the same on mine after rear upper arms replaced on Friday.
Switched off then on and it's only done it once since.
So will be interested to see how this is resolved.
But I don't have the nav screen, only a lowly XS model
I did plug in the iid and cleared faults, hope I've done right D3 57 xs Stornaway grey
D2 02 commercial silver gone but a great servant and won't be forgotten
Iid Bluetooth
1st Mar 2017 9:17 pm
Alan B
Member Since: 12 Feb 2013
Location: Fife
Posts: 6528
Nope it's back
But seen disco Mikey today and it's the compressor cap, so getting replaced next week,
Hope that sorts it.
D3 57 xs Stornaway grey
D2 02 commercial silver gone but a great servant and won't be forgotten
Iid Bluetooth
2nd Mar 2017 7:53 pm
Ja92mie
Member Since: 16 Sep 2014
Location: Newquay
Posts: 1259
So not related to changing upper arms then?
2nd Mar 2017 8:00 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Must be the season for the compressor cap Al, mine has just faulted too and I'm sure it's the cap.
Damn compressor is only 20 months old too. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
2nd Mar 2017 9:21 pm
Alan B
Member Since: 12 Feb 2013
Location: Fife
Posts: 6528
Ja92mie = no just unlucky
Narpy = mines is 10 years old D3 57 xs Stornaway grey
D2 02 commercial silver gone but a great servant and won't be forgotten
Hi Narpy, thanks for the thread links, looks like it's the soapy water treatment at the weekend to check for a leak, will update with what I find, thanks everyone for your comments.
3rd Mar 2017 12:47 am
Paddington
Member Since: 30 May 2013
Location: Southampton
Posts: 280
Any thoughts on this one - start the d3 10 to 15 seconds later amber light on - turn key off then start again and no amber light , I had a new AMK compressor fitted about a year and a half ago .
Previous cars
Discovery 200 tdi
Discovery 300 tdi
Discovery td5
Ok Guys have checked the compressor end cap with soapy water and there's no evidence of a leak, any suggestions for the next step please.
4th Mar 2017 7:25 pm
bear1009
Member Since: 12 Feb 2013
Location: aberdeen
Posts: 214
Check the wires going to the height sensor could be a broken wiretinted windows
led sidelights
new fuel pump
disco 3 sticker
4x4 screen unlocked ( thanks bell autos)
bell autos egr blanking kit
halo fog day running lights
ffrr sat nav hack
gvif reverse camera
clear side indicators
alisport intercooler hoses
5th Mar 2017 7:52 am
Paddington
Member Since: 30 May 2013
Location: Southampton
Posts: 280
Hi all
Today been out and had n/s/f wheel arch liner off to check the 3 plugs and they look good .
Swapped out the reservoir valve , checked all the compressor plugs and then on to the soapy water and found no air leaks .
But I'm still getting the amber suspension light up when I start up,( not every time ) if I turn the car off and restart no amber light, next thing to change is the relay which I will do tomorrow.
Got a fault code which is
Vehicle Dynamic
U0132-87 (08 ) Lost communication with ride level control module - Bus signal/message failure - missing a message
Any help please !!!!
Previous cars
Discovery 200 tdi
Discovery 300 tdi
Discovery td5
Hi Guys, so have checked the wires going to the height sensor and no broken wires, compressor end cap not leaking, so what's the next step, is it check the height calibration or new sensor, advise please.
12th Mar 2017 5:14 pm
Danish
Member Since: 13 Jul 2016
Location: Manchester
Posts: 134
Try a 4 wheel alignment...D4 HSE
D3 HSE
D2 ex police upgraded to HSE
P38
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
