biasbilt
Member Since: 12 Sep 2014
Location: Devon
Posts: 7
|
Hi Guys,
I'm after a favour to identify a wire on 2005 Discovery 3 TDV6.
Following a suspension fault, which I tracked down to a damaged wire by the multi plugs behind the nsf wheel (build up of mud and stone had caused the insulation to be chafed through and the wire corroded out) there is another previous owner repair that I need to sort out.
The white wire in the centre plug has been repaired with a blue crimp connector which needs to be repaired before it fails again in the future. Access is very tight because of where the join is, so before I cut and find I can't repair, what is this wire for (so I can go direct if needed/accessible)?
Obviously this was a particularly carp piece of design by LR which is why they moved the connectors and rerouted the loom on later cars. I'll be putting an extra rubber flap hanging off the plastic liner to prevent the build up mud/stones on the outrigger and the same happening again.
TIA,
Toby
|
13th Feb 2017 2:27 pm |
|
|
biasbilt
Member Since: 12 Sep 2014
Location: Devon
Posts: 7
|
Anyone?
|
13th Feb 2017 11:58 pm |
|
|
biasbilt
Member Since: 12 Sep 2014
Location: Devon
Posts: 7
|
Bump
|
15th Feb 2017 8:47 am |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
|
I havent a clue but can recommend superseal plugs as being pretty waterproof and easy to fit, the heat shrink crimp connectors are also real good.
|
15th Feb 2017 8:52 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
Pictures always help !
As well as filling in your vehicle profile .. so we know what spec car you have G4 Gone ...but not forgotten
|
15th Feb 2017 9:06 am |
|
|
|
biasbilt
Member Since: 12 Sep 2014
Location: Devon
Posts: 7
|
Agree that it needs to be repaired, but I'd like to know where it goes incase I need to surface lay a new wire in. The break is very close to where the wire exits the loom and I might not be able to get back to uncorroded wire and make an effective repair.
Cheers
|
15th Feb 2017 7:26 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
|
white wire with black stripe is reservoir valve (by tank)
|
15th Feb 2017 8:21 pm |
|
|