Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
D3 - 13 pin upgrade - land rover or oem Britpart?
Having just acquired a TA bailey senator I'm looking to upgrade the D3s 12n only electrics to 13 pin to save on adaptor and make full use of Alko atc and fridge etc.
Prices seem to vary wildly but mainly due to original part or britpart. Is there much difference in quality or fit?
5th Feb 2017 11:56 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
The original part is made to a very high standard with quality parts and fully potted connections. It would be hard to recommend anything else as (for once) JLR got this one right. I am never keen to pay LR parts prices unless needed, but I do for tow electrics.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
Thanks can anyone confirm that YWJ500160 is the part number for D3 and RRS as only listed as Rrs in a few places?
edit: should be YWJ500211
Last edited by DiscoJake on 6th Feb 2017 5:22 pm. Edited 1 time in total
5th Feb 2017 1:25 pm
mark the spark
Member Since: 22 Jun 2011
Location: southampton
Posts: 2477
jake i had.
my indy fit mine and he had a bit of a hard time as apparently had to
remove the rear bumper as a mounting plate is required for the 13 pin
just been out checking my van hooks up ok and its a lot more fiddly than the old 2 plug set up as new 13 pin is push and twist and theres not a lot of finger room as new plug mounted on right of recess and plug twists to the right
just discovered my on board charger has died aswell over the winter so not a good day MY05 SE D3 Manual my first LR what a car
MY10 HSE D4 auto
MY14 XXV more buttons than the spaceshuttle
5th Feb 2017 1:45 pm
D4mation
Member Since: 29 Jul 2011
Location: Ruralshire
Posts: 593
My 13 pin socket was factory fitted and it's a D4 not a D3 so don't know about a mounting plate.
Never have a problem connecting up the 13 pin plug - hinge of the socket is at 9 o'clock and the plug is rotated anti-clockwise before inserting in the socket, with the tongue on the plug at the 6 o'clock postion; a quick turn of the plug clockwise to 9 o'clock and the hinge then snaps over the tongue.
Picture might help. You can enlarge it if you visit my gallery.
MY12 D4 HSE Ipanema Sand
6th Feb 2017 6:33 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
No problem with mine either with plenty clearance around it:
Click image to enlarge
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10299
and you dont have to remove the bumper on D3 or D4 to fit towing electrics. You do if you want to fit the "plate" LR supply but it isnt actually needed, so dont bother with it and fitting is much easier
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
6th Feb 2017 9:07 am
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
wrong part number
should be ordering YWJ500211, the last post from TLO he was doing them for £98, a few years back now but current price is looking more like £200
do we still have a contact a Yeovil?
edit:
my local dealer has now confirmed current price for him to order in from land rover is £220.21. He would do 10% discount but that's still £198....
Britpart it is then
6th Feb 2017 11:15 am
nearlee
Member Since: 15 Dec 2012
Location: where the sheep are scared
Posts: 1777
Try dan@duckworths he's usually very good for gen partsJust remember:-
Amateurs built the Ark
Professionals built the titanic
6th Feb 2017 10:05 pm
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
The problem is land rover themselves have set the retail price so the dealers have to charge more
6th Feb 2017 10:46 pm
Snowman
Member Since: 06 Aug 2016
Location: Holmfirth
Posts: 317
Looks a bit more reasonable , but still not cheap.
Series 3 SWB Wagon OEC614Y sold
Discovery 1 50th Anniversary Edition S882 BMA sold
Freelander TD4 ES Y615 YEC sold
Freelander TD4 Kalahari NX53 EVH sold
D2 TD5 XS 2003 YF03 WVW sold
D3 TDV6 2008 SE
6th Feb 2017 11:37 pm
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
Yeah a reasonable price but they don't actualy have any stock!
Ordered one this morning and been refunded already
7th Feb 2017 12:06 am
mark the spark
Member Since: 22 Jun 2011
Location: southampton
Posts: 2477
thanks for the pics guys i can see why im struggling now
the muppets have fitted mine 180 degrees out as my flap hinge is on the right not left as yours
hence the fouling as my plug twists right
if its and easy swap round i will do it myself but think this could be going back to them for sortingMY05 SE D3 Manual my first LR what a car
MY10 HSE D4 auto
MY14 XXV more buttons than the spaceshuttle
7th Feb 2017 9:32 am
D4mation
Member Since: 29 Jul 2011
Location: Ruralshire
Posts: 593
Here's a couple of cheaper sources. They might be mickey mouse suppliers so best to ring and confirm stock, and whether they are genuine LR parts.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
