Member Since: 21 Feb 2016
Location: Clitheroe
Posts: 330
FBH guru help required
Hi
Had he pleasure of meeting Aerialmark earlier and he cleared some faults with his IID and tried to activate my FBH however when it came to priming the system the following fault was apparent
Operation failed E7
Any ideas what this is gents?
Thanks
Andy2010 D4 GS
2016 V40 D4 (daily eco hack)
4th Feb 2017 4:23 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Usually when the FBH is being controlled by the car. Or comms to the fbh not working.
Did it prime ok?Bodsys Brake Bible
No Ian it still came up with same fault Operation failed E7.
Would this have any bearing on it ?
HVAC-Ventilation
U0166-87 (28) Lost communication with auxiliary heater control module - Bus signal/message failure - missing a message
( on 09-11-2016 07:44:50 at 76938 mi )The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
I think it may have been off Mick The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
4th Feb 2017 9:31 pm
marco 110
Member Since: 15 Nov 2009
Location: SALLES 33
Posts: 1010
Check fuse under bonnet;)Marco.
-D4 sdv6 HSE 2012 , high beam assist , surround cam, tv , and a lot of nice stuff..
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum