Member Since: 30 Jan 2017
Location: Sicily
Posts: 19
Bushing Tightening
Hello, new guest on forum. I am replacing the bushing.
I am looking for the tightening details of the bushing (bush) of the 2.7 d engine.
The words that I am using might be wrong... My language is italian so I have used the google translation for the name of the bushes that I have imported from UK. But the dealer has not got the info on the tightening.
Thank you for your help
30th Jan 2017 7:48 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
Sorry SicilyDisco3, you will have to find a better translation. Bush or Bushing could refer to many things.
Try to describe the area you are talking about.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
30th Jan 2017 7:52 pm
SicilyDisco3
Member Since: 30 Jan 2017
Location: Sicily
Posts: 19
Hello, thank you for the help...
New translation:
We are changing the bushing between the "piston rod / connecting rod" with the "driveshaft/cranckshaft"
Also the ones between the engine block and the "crankshaft/driveshaft"
Practicly the pistons move the rods that are connected with the main driveshaft with the rods that can heat up and melt causing lots of damage... Also the driveshaft is moving around itself with the two end sides into the main engine block, there also there are the rods that we are changing...
I hope I am getting better...
Sorry
30th Jan 2017 8:34 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Do you mean bearings Discovery 3 se gone
Range rover sport supercharged here:)
30th Jan 2017 8:42 pm
SicilyDisco3
Member Since: 30 Jan 2017
Location: Sicily
Posts: 19
YES!
You found the name..
The bearings we are changing and cannot find the exact tightenings...
30th Jan 2017 8:47 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Search oh here im sure someone was rebuilding a engine and asked for the settings Discovery 3 se gone
Range rover sport supercharged here:)
30th Jan 2017 8:49 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Member Since: 30 Jan 2017
Location: Sicily
Posts: 19
Thanks, I tried to send a message to him.
Grazie
30th Jan 2017 8:59 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
SicilyDisco3 wrote:
Hello, thank you for the help...
New translation:
We are changing the bushing between the "piston rod / connecting rod" with the "driveshaft/cranckshaft"
The description is 'Big End Bearing'. Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
30th Jan 2017 9:03 pm
SicilyDisco3
Member Since: 30 Jan 2017
Location: Sicily
Posts: 19
Grazie from Sicily!
30th Jan 2017 9:08 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8075
Search for "big end torque settings" and "main bearing torque settings"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum