Member Since: 29 Jun 2014
Location: Dunbartonshire
Posts: 59
Suspension compressor
After overhauling the complete Hitachi, new seal kit for all valve block's, new suspension air tank, still appears that the compressor runs for around 5 mins (it's down on the bump stops) then cuts out and is extremely hot to the touch.
So, think it's time to bite the bullet and fit a new compressor. Any recommendations as to AMK or another Hitachi? I'm seriously thinking of selling once finished as this car has officially broken me! ☹
Cheers
16th Mar 2021 1:49 pm
N5Fav
Member Since: 28 Jan 2021
Location: LEICESTER
Posts: 134
Are you sure there is no leaks anywhere?
I had one like this once, then found the air reservoir was leaking, so no matter how hard the compressor was working, it just got hot and bothered and then stopped for a rest with no chance of lifting the car.
New reservoir fitted and up she went.1994 Defender 300tdi 110 commercial
2007 Disco 2.7 XS Buckingham Blue
1959 Standard 10 Coffe & Cream
1974 Vauxhall Magnum 1800 estate Olivine Starfire Green
1994 Renault 19 Cabrio
1995 Kawasaki GPz 1100
16th Mar 2021 1:56 pm
Highland Ladide
Member Since: 29 Jun 2014
Location: Dunbartonshire
Posts: 59
Brand new tank/res fitted when I done the compressor and valve block's.
16th Mar 2021 2:17 pm
Highland Ladide
Member Since: 29 Jun 2014
Location: Dunbartonshire
Posts: 59
Update.....Took compressor off ran it on the bech for 5min didn't overheat, back onto car hooked it up ran for 30 seconds cut out and again very hot to touch.
Any suggestions folks???
16th Mar 2021 2:52 pm
Hairy47
Member Since: 13 Jul 2017
Location: Bradford
Posts: 277
Blocked pipes or valve blocks
Andy
16th Mar 2021 3:02 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
Make sure you haven't got a crushed or kinked pipe.
Have you checked the air intakeAndrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
16th Mar 2021 3:06 pm
Highland Ladide
Member Since: 29 Jun 2014
Location: Dunbartonshire
Posts: 59
Cheers Andy.
Currently trying a process of elimination, hooked it back and left the pipes running to the rear off and it ran much longer before cutting out.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum