Member Since: 15 Jan 2010
Location: Stockholm
Posts: 773
injectors
When reading injector values with my IID I get
injector 2 868
all the others are 950 and up
When pushing the throttle down all values are locked to 983
Are the values normal or should I change the injector that is low?
25th Jan 2017 11:49 am
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
need all the injector values
1 ?
2 ?
3 ?
4 ?
5 ?
6 ?
25th Jan 2017 1:52 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72774
And make sure warmed up.
Mine before injectors were changed, was getting restricted injector faults.
Click image to enlarge
25th Jan 2017 1:54 pm
urhunden
Member Since: 15 Jan 2010
Location: Stockholm
Posts: 773
Warm engine and idle
1. 1025
2. 888
3. 983
4. 914
5. 1093
6. 980
25th Jan 2017 7:41 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72774
Doesn't look too bad at all.
25th Jan 2017 7:50 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8069
They look good to me, readings can only be taken at tick over, they will all read the same at over 900rpm.It can when others can't,
It will when others won't,
It goes where others don't.
25th Jan 2017 7:52 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
urhunden wrote:
Warm engine and idle
1. 1025
2. 888
3. 983
4. 914
5. 1093
6. 980
looking good to me
25th Jan 2017 8:26 pm
Paddington
Member Since: 30 May 2013
Location: Southampton
Posts: 280
Had a look at mine today, not sure what they should be so if any one can shed some light on these figures I would be very grateful .
Previous cars
Discovery 200 tdi
Discovery 300 tdi
Discovery td5
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum