Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
|
BAZ8046
Member Since: 26 Feb 2010
Location: Chatham
Posts: 278
|
Sorry, I thought I could see a G at the start of the number top left.
I nearly returned mine when it turned up in a Britpart box after ordering an OEM part.
After checking the markings on the prop it was a GKN prop so fitted it.
Britpart do make/sell a very wide range of parts of variable quality.
I normally stick to Bearmach, much more consistent quality D4 2016 Landmark, Waitomo Grey.
D3 2005 HSE, Bonatti Grey, now sold but still comes back for servicing.
Defender 2002 Td5 Commercial, had a hard life but slowly being restored.
I only work so I can afford to repair my Land Rovers!
|
19th Jan 2017 10:57 pm |
|
|
Apache
Member Since: 17 Oct 2011
Location: Yorkshire
Posts: 691
|
Compusmentis wrote:Ja92mie wrote:What's fitting a rear prop like as a job? Straightforward?
Yes, took me about 1.5 - 2 hours.
You need torx sockets - from memory E10 and E12, but better check...
Pardon? IIRC there's a heat shield to remove and 12 bolts to remove and 12 to refit (I got new ones from AF, but the original ones would have been fine).
I would say 30 mins max, including getting tools out and putting them away.
A spare pair of axle stands to support the new prop helps.
|
20th Jan 2017 2:16 am |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20731
|
BAZ8046 wrote:Sorry, I thought I could see a G at the start of the number top left.
I nearly returned mine when it turned up in a Britpart box after ordering an OEM part.
After checking the markings on the prop it was a GKN prop so fitted it.
Britpart do make/sell a very wide range of parts of variable quality.
I normally stick to Bearmach, much more consistent quality
And a 3 year warranty now My D3 Build Thread
TDV8 Retrofit Build Thread
|
20th Jan 2017 8:20 am |
|
|
Ja92mie
Member Since: 16 Sep 2014
Location: Newquay
Posts: 1259
|
BAZ8046 wrote:The G prefix on the Britpart part number means that it should be an OEM part which I think is GKN for the prop.
I have the same prop on mine and it's been fine.
So is the Britpart one ok?
|
20th Jan 2017 10:30 am |
|
|
BAZ8046
Member Since: 26 Feb 2010
Location: Chatham
Posts: 278
|
The problem with Britpart is they will supply several different quality parts at different prices.
I only used the ones where the Britpart part number begins with a G as these parts are all made by OEM manufacturers.
The rest of the Britpart range is a bit of a gamble.
As Mikey says the Bearmach parts are a safer bet. D4 2016 Landmark, Waitomo Grey.
D3 2005 HSE, Bonatti Grey, now sold but still comes back for servicing.
Defender 2002 Td5 Commercial, had a hard life but slowly being restored.
I only work so I can afford to repair my Land Rovers!
|
20th Jan 2017 11:54 pm |
|
|
Ja92mie
Member Since: 16 Sep 2014
Location: Newquay
Posts: 1259
|
Could anyone inform me of what bolts I need to do the rear prop? I believe I need the following-
TYG500130- 4 needed
TYF500020- 3 needed
TYP500180- 6 needed
Is that all the bolts I need?
Thanks in advance,
Jamie
|
29th Jan 2017 10:51 am |
|
|
Chrisholly31
Member Since: 21 Aug 2013
Location: South West
Posts: 67
|
Advanced Favtors sells all the bolts and other parts needed. I believe there is also 10% off until tomorrow (ADVLRF is the code). They have the diagrams/quantities req'd on their website, from what I can see the part no's and details you have listed appear correct (but double check on the site!) I had my rear prop changed by Woody 32, seem to take him no longer than 45 mins - that was with a ramp though and his previous (extensive) experience of the job. 57 Defender 110 XS TDCi
55 Discovery 3 TDV6 āSā Manual, re-homed in the West Country, lovingly maintained by Woody32
63 Discovery 4 SDV6 XS (Best of the bunch).
|
29th Jan 2017 11:39 am |
|
|
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
|
A "How Not To" guide has been written by Dalek here: http://www.disco3.co.uk/forum/topic134252.html
Be careful out there. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
|
29th Jan 2017 1:00 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.