Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Crimping Tools
Ive just got through yet another set of crimping tools for the automotive type crimps for electrical connectors.
Does anyone have recommendations for crimping tools (not the monster sizes, just red/blue/yellow type) that will last more than a couple of months of almost daily use?
Ideally with wire stripper built in, but not essential.
So a decent set of wire strippers as well if seperate.
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
14th Jan 2017 6:37 pm
J@mes
Member Since: 10 Nov 2008
Location: Bomber County
Posts: 4547
I used an RS Pro crimp tool almost daily for 10 years, in harsh environments.
I still have them, but have a desk job now
I bought a set from screwfix for at home but invariably end up bringing the RS ones home from work if I need any crimping doing!
14th Jan 2017 6:46 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18448
I detest the red/blue/yellow crimps so I do not have a tool for them. But as above I would buy the best you can afford, and from a reputable supplier not just off eBay.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
14th Jan 2017 6:47 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I also hate the type with a passion but needs must on occasion and use a Sealey ratchet crimper (AK3857), which works well, has quick-change jaws and has stood-up to 6 years of regular use.
For proper uninsulated automotive crimps I use the Japanese 'Engineer' brand. Good prices and excellent quality. I also use the same brand for my fine stranded wire strippers.
I can grab a photo of them if needed.
Land Rover - Turning Drivers into Mechanics Since 1948
Not used every day, but usually a few times a week, for the past several years. Still work great.
As for crimping tool, I use a ratchet type one similar to the one posted by gstuart, not sure what brand.
Again regular use for many years with no problems.
14th Jan 2017 9:49 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
For larger stuff I also have the CK linked above - there are many that look similar but are far from the same. For end-on stripping I use the composite Knipex.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 24 Mar 2013
Location: Derbyshire
Posts: 2260
Not keen on the connectors but i had a Sealey ratchet type that broke a few years back. Never got round to replacing it i have made do with a 8 ton tool for the few times i needed to do it. Nut with a sledge hammer approach
I detest the red/blue/yellow crimps so I do not have a tool for them. But as above I would buy the best you can afford, and from a reputable supplier not just off eBay.
Curious, how do you join cables then?Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500
_________________________________________________
Disco Picture Website Here
Some simple lower cost solutions
https://www.amazon.co.uk/Draper-35574-Ratc...mping+toolBREXIT - done properly.
Right now ...We need Government - not Politics
Save the Dipstick Flagbearer-keep it simple, less likely to fail campaign-agenda items:Starting Handles, Acetylene Lamps.
Founder: Dipsticks-R-Us Inc
D3 HSE-perfectly formed, passenger friendly...has real DIPSTICK
Jag XK-but sadly no DIPSTICK...HUGE design fault
FL2 has DIPSTICK..."real comfort in rear seats"
VW Golf wondermobile (?)..has real DIPSTICK
Morris Minor..original DIPSTICK technology..and a real KEY.
14th Jan 2017 11:17 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
anglefire wrote:
Martin wrote:
I detest the red/blue/yellow crimps so I do not have a tool for them. But as above I would buy the best you can afford, and from a reputable supplier not just off eBay.
Curious, how do you join cables then?
For me ferrules, heatshrink butt crimps or uninsulated terminal crimps.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 01 Jun 2014
Location: St Neots
Posts: 1641
anglefire wrote:
Martin wrote:
I detest the red/blue/yellow crimps so I do not have a tool for them. But as above I would buy the best you can afford, and from a reputable supplier not just off eBay.
Curious, how do you join cables then?
Remove insulation, twist together, bit of solder and then tape or better still heat shrink over the top. It's a lot of faff though so would depend on what I am doing and if I can be arsed bringing the soldering iron home from work. (I don't solder at work, but soldering irons are available from others)Sill protection - LED internal lights - LED reverse lights - boot liner - Dog Guard - Rock sliders
MY12 D4 HSE - been and gome
MY16 D4 Landmark
14th Jan 2017 11:38 pm
michael calvert
Member Since: 03 Dec 2011
Location: West Yorkshire
Posts: 519
Have there
Mine are about 10 year old now fantastic piece of kit
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
