Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D3)

D3 cutting out
Post Reply  Down to end
Page 1 of 1
DiscoStoo
 


Member Since: 16 Feb 2016
Location: Norfolk
Posts: 164

England 
D3 cutting out

Hi all, probably too much of vague question, but I'll try...! My wife was in the car earlier and had it at idle for about 5 mins, during which it kept randomly cutting out for no apparent reason... Each time it restarted ok, but just a bit worrying as to what's causing it?!
I've had a look, nothing seems out of place, air filter is new, not clogged up or anything, no split pipes that I could see, (which wasn't much!) the only thing was the dipstick wasn't all the way back in, but in or out had no bearing on it idling... (Didn't know if had any effect on the breather system etc if it was out?)

Only other question is that, on the back bulkhead, near the master cylinder, I saw 2 brake pipes (?) that were cut? As per pic...

Thanks in advance for any helps or pointers guys!
  
Post #176234712th Jan 2017 8:10 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site