Member Since: 13 Sep 2015
Location: Lincolnshire
Posts: 202
Headlight washer leak
My headlight washer is just leaking out the jets once I fill the bottle up.
Is there a seal broke somewhere or is it a case of new washer?
5th Jan 2017 1:42 pm
Landy_andy
Member Since: 05 May 2013
Location: Hertfordshire
Posts: 676
There is a T piece that is also a valve behind the bumper. The valve has either failed, or has been replaced with a standard T piece. It will only allow the water to flow out for a while, as it's only the tube to the reservoir that is higher than the washer jets.
Andy.
5th Jan 2017 2:26 pm
PeteHse
Member Since: 13 Sep 2015
Location: Lincolnshire
Posts: 202
Just to bump this a little....
Do you have a pic of this t piece your referring to? LR had no idea what I was talking about yesterday.
5th Feb 2017 12:19 pm
Skynet
Member Since: 23 Jul 2014
Location: Melksham, Wiltshire
Posts: 868
When I was investigating my headlight washers not working (turned out to be the second pump) I stripped that T piece down. The bottom of T goes to washer pump and 2 arms to the headlight washers. The centre junction of the T has a small housing with a spring loaded ball bearing acting as a 'non return valve' inside. I think any non return T valve will do the job just as well.Dave
D3 2006 HSE, Cairns Blue - gone
D4 2016 SE, White
Member Since: 13 Sep 2015
Location: Lincolnshire
Posts: 202
Thanks, I've noticed since it started leaking that my headlight washers have a slight delay too. Hoping this is linked to the T piece otherwise it's new pump time I think.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum