Mike M.
Member Since: 04 Dec 2016
Location: Cumbria
Posts: 12
|
Unable to configure notification panel display |
|
A previous owner has replaced the LR radio/cd player in my 07 D3 with a JVC KW-R600BT unit. The driver information display is set to miles/gal etc., so is almost ok, but it doesn't show the clock. The clock is shown on the radio display but attempts to get it shown on the driver's information panel have failed. Also, I wanted to alter the Headlamp off Delay but using the i button to get the settings panel up, then using the steering wheel radio buttons to access the settings only results in the radio doing strange things. Neither of these things warrant throwing shed loads of money at, but I'm posting this in case anyone on here can offer any advice. I leave the radio on 0 volume, so have that clock on show, but would be nice to have it in front of me!!
|
31st Dec 2016 12:22 am |
|
|