- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Manual Zermatt Silver 2007 Discovery 3 TDV6 HSE Manual Zermatt Silver](../images/veh/zermatt_silver.gif)
|
Wheel change / suspension errors |
|
Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly
|
23rd Oct 2005 5:21 pm |
|
|
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
![](templates/vbnew/images/spacer.gif)
|
Re: Wheel change / suspension errors |
|
10forcash wrote:Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly ![Wink Wink](images/smiles/icon_wink.gif)
Never mind that, what is the noise level like?
|
23rd Oct 2005 5:23 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Manual Zermatt Silver 2007 Discovery 3 TDV6 HSE Manual Zermatt Silver](../images/veh/zermatt_silver.gif)
|
Re: Wheel change / suspension errors |
|
BN wrote:10forcash wrote:Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly ![Wink Wink](images/smiles/icon_wink.gif)
Never mind that, what is the noise level like? had to put ear defenders on the dog and loosened a couple of ridge tiles on next door's roof as the yoofs would say 'bangin man'
|
23rd Oct 2005 5:25 pm |
|
|
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
![](templates/vbnew/images/spacer.gif)
|
Re: Wheel change / suspension errors |
|
10forcash wrote:BN wrote:10forcash wrote:Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly ![Wink Wink](images/smiles/icon_wink.gif)
Never mind that, what is the noise level like? had to put ear defenders on the dog and loosened a couple of ridge tiles on next door's roof as the yoofs would say 'bangin man' ![Rolling Eyes Rolling Eyes](images/smiles/icon_rolleyes.gif)
Take it that they rumble a bit then
|
23rd Oct 2005 6:46 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Manual Zermatt Silver 2007 Discovery 3 TDV6 HSE Manual Zermatt Silver](../images/veh/zermatt_silver.gif)
|
Re: Wheel change / suspension errors |
|
BN wrote:10forcash wrote:BN wrote:10forcash wrote:Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly ![Wink Wink](images/smiles/icon_wink.gif)
Never mind that, what is the noise level like? had to put ear defenders on the dog and loosened a couple of ridge tiles on next door's roof as the yoofs would say 'bangin man' ![Rolling Eyes Rolling Eyes](images/smiles/icon_rolleyes.gif)
Take it that they rumble a bit then ![Very Happy Very Happy](images/smiles/icon_biggrin.gif) i was on about the radio there's a bit of rumble from the tyres, although most of it is harmonic, at the right speeds, most of it disappears
|
23rd Oct 2005 6:48 pm |
|
|
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
![](templates/vbnew/images/spacer.gif)
|
Re: Wheel change / suspension errors |
|
10forcash wrote:BN wrote:10forcash wrote:BN wrote:10forcash wrote:Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly ![Wink Wink](images/smiles/icon_wink.gif)
Never mind that, what is the noise level like? had to put ear defenders on the dog and loosened a couple of ridge tiles on next door's roof as the yoofs would say 'bangin man' ![Rolling Eyes Rolling Eyes](images/smiles/icon_rolleyes.gif)
Take it that they rumble a bit then ![Very Happy Very Happy](images/smiles/icon_biggrin.gif) i was on about the radio there's a bit of rumble from the tyres, although most of it is harmonic, at the right speeds, most of it disappears
How about balance as Garry used very little balance weight material as they appeared quite good?
|
23rd Oct 2005 6:51 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Manual Zermatt Silver 2007 Discovery 3 TDV6 HSE Manual Zermatt Silver](../images/veh/zermatt_silver.gif)
|
Re: Wheel change / suspension errors |
|
BN wrote:10forcash wrote:BN wrote:10forcash wrote:BN wrote:10forcash wrote:Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly ![Wink Wink](images/smiles/icon_wink.gif)
Never mind that, what is the noise level like? had to put ear defenders on the dog and loosened a couple of ridge tiles on next door's roof as the yoofs would say 'bangin man' ![Rolling Eyes Rolling Eyes](images/smiles/icon_rolleyes.gif)
Take it that they rumble a bit then ![Very Happy Very Happy](images/smiles/icon_biggrin.gif) i was on about the radio there's a bit of rumble from the tyres, although most of it is harmonic, at the right speeds, most of it disappears
How about balance as Garry used very little balance weight material as they appeared quite good? balance is fine... although one wheel has 80g on the outer rim
|
23rd Oct 2005 6:54 pm |
|
|
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
![](templates/vbnew/images/spacer.gif)
|
Re: Wheel change / suspension errors |
|
10forcash wrote:BN wrote:10forcash wrote:BN wrote:10forcash wrote:BN wrote:10forcash wrote:Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly ![Wink Wink](images/smiles/icon_wink.gif)
Never mind that, what is the noise level like? had to put ear defenders on the dog and loosened a couple of ridge tiles on next door's roof as the yoofs would say 'bangin man' ![Rolling Eyes Rolling Eyes](images/smiles/icon_rolleyes.gif)
Take it that they rumble a bit then ![Very Happy Very Happy](images/smiles/icon_biggrin.gif) i was on about the radio there's a bit of rumble from the tyres, although most of it is harmonic, at the right speeds, most of it disappears
How about balance as Garry used very little balance weight material as they appeared quite good? balance is fine... although one wheel has 80g on the outer rim ![Shocked Shocked](images/smiles/icon_eek.gif)
Put that as the spare I take it.
|
23rd Oct 2005 6:57 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Manual Zermatt Silver 2007 Discovery 3 TDV6 HSE Manual Zermatt Silver](../images/veh/zermatt_silver.gif)
|
Re: Wheel change / suspension errors |
|
BN wrote:10forcash wrote:BN wrote:10forcash wrote:BN wrote:10forcash wrote:BN wrote:10forcash wrote:Right, fitted me 17" wheels today, previously did a trial fit with the expected suspension error
Except that today, not through planning, but completely without thinking about it - no error
How so? well, I left the radio on
no 'fart' as previously
no error message
seems that the data bus is being held open for the suspension as well, yes, the level transducers moved, but did not attempt to level as previously
so it looks like LR have carefully studied the average garage grease monkey's habits and configured the car so that when the radio is on and volume set to 'ear bleed' everything works properly ![Wink Wink](images/smiles/icon_wink.gif)
Never mind that, what is the noise level like? had to put ear defenders on the dog and loosened a couple of ridge tiles on next door's roof as the yoofs would say 'bangin man' ![Rolling Eyes Rolling Eyes](images/smiles/icon_rolleyes.gif)
Take it that they rumble a bit then ![Very Happy Very Happy](images/smiles/icon_biggrin.gif) i was on about the radio there's a bit of rumble from the tyres, although most of it is harmonic, at the right speeds, most of it disappears
How about balance as Garry used very little balance weight material as they appeared quite good? balance is fine... although one wheel has 80g on the outer rim ![Shocked Shocked](images/smiles/icon_eek.gif)
Put that as the spare I take it. dunno, just bolted them on, seem fine after a bit of a blast
|
23rd Oct 2005 6:58 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Manual Zermatt Silver 2007 Discovery 3 TDV6 HSE Manual Zermatt Silver](../images/veh/zermatt_silver.gif)
|
BTW, what's the torque settings for the wheelnuts? got Mrs. 10 to set 'em to 15-1/2 stone
|
23rd Oct 2005 6:59 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
![](templates/vbnew/images/spacer.gif)
|
140Nm I seem to remember.....
I will have a torque wrench in the back in Wales.... The End
|
23rd Oct 2005 7:19 pm |
|
|
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
![](templates/vbnew/images/spacer.gif)
|
Slimer wrote:140Nm I seem to remember.....
I will have a torque wrench in the back in Wales....
Bit less than MrsTFC then
|
23rd Oct 2005 7:27 pm |
|
|
Dom Harvey
Lord of the Four Fingers
Member Since: 15 Apr 2005
Location: Dorset
Posts: 7454
![](templates/vbnew/images/spacer.gif)
![2012 Discovery 4 3.0 SDV6 GS Auto Orkney Grey 2012 Discovery 4 3.0 SDV6 GS Auto Orkney Grey](../images/veh/orkney_grey.gif)
|
Slimer wrote:140Nm I seem to remember.....
I will have a torque wrench in the back in Wales....
...don't to forgot to tie it down otherwise you might have the sense knocked out of you 2004 Discovery 3 - gone
2006 Discovery 3 - gone
2008 Discovery 3 GS - gone
2011 Freelander LE Special Edition - gone
2007 Discovery 3 XS - gone
2012 Discovery 4 GS - current
|
23rd Oct 2005 7:50 pm |
|
|
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
![](templates/vbnew/images/spacer.gif)
|
Dom Harvey wrote:Slimer wrote:140Nm I seem to remember.....
I will have a torque wrench in the back in Wales....
...don't to forgot to tie it down otherwise you might have the sense knocked out of you ![Shocked Shocked](images/smiles/icon_eek.gif)
Now we have a wrench that talks
|
23rd Oct 2005 8:05 pm |
|
|
Nomad
Member Since: 17 Jul 2005
Posts: 15
![](templates/vbnew/images/spacer.gif)
|
I assume that the your TDV6 Disco 3 has smaller breaks then my V8 LR3 right? That is why you were able to put the 17" rim on?
Thanks,
Nomad
|
24th Oct 2005 1:35 am |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|