MorrisMike
Member Since: 27 Jul 2016
Location: East Midlands
Posts: 16
|
Analogue clock adjustment - ummm.... |
|
Switching to Daylight Saving, and set my digital clock as per the manual with no issues. But the analogue clock refuses point blank to move. I've been reading up and seen that a 'battery reset' MAY cure the problem, but I dunno what a battery reset actually is
|
1st Nov 2016 2:56 pm |
|
|
nessie
Member Since: 19 Mar 2006
Location: Chapelle-aux-bois
Posts: 411
|
I'd think that a battery reset is actually disconnecting the battery and leave it this way for at least 5' so that every system (capacitator) actually runs out of power.
Haven't had issues with mine, so I'm not sure if this could help. D4
Disco4.com sticker
D3 11y, 425k km - sold, miss it though (MAR, DNK, NOR, SWE, SCO, WAL, MUD ...)
|
1st Nov 2016 3:41 pm |
|
|
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
|
After battery leads have been disconnected you need to hold them together for around 20 seconds then refit. L633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
|
1st Nov 2016 3:59 pm |
|
|
|