drout
Member Since: 10 Dec 2014
Location: hexham
Posts: 87
Fitting raised air intake
Any advice on the best type of drill bit to use for the windscreen pillar.
My, new, metal drills just are not up to the job
4th Jul 2016 6:26 pm
Mogwyth
Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976
Cobolt bits will do the job ........eventually! ==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
4th Jul 2016 6:47 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6295
never had any issues with good hss drill even on the D3 chassis
G
4th Jul 2016 7:27 pm
BruceT
Member Since: 22 Oct 2013
Location: Johannesburg
Posts: 100
My windscreen pillar (A pillar) had a hole in the correct place already. Check before you drill.
6th Jul 2016 2:06 pm