Member Since: 08 Dec 2015
Location: Sidcup, Kent
Posts: 309
Trim clips
The metal clips that hold the interior sill trim on (clips in holds carpet down) are missing does anyone know the correct clips I need or even better part number.
Thanks PeteDe tango
BAS remap
EGR blank
Colour coded
21" range rover wheels
tinted windows
side steps
3 blink, C.O.D
1st May 2016 7:29 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
I'm not exactly which clips you mean but these are the clips I use when I'm disassembling my car FYC500040
1st May 2016 7:32 pm
D16PJM
Member Since: 08 Dec 2015
Location: Sidcup, Kent
Posts: 309
That's the ones thanks, Paddocks have got them but £6 to send 3 metal clips, I know they have to package but even so.
PeteDe tango
BAS remap
EGR blank
Colour coded
21" range rover wheels
tinted windows
side steps
3 blink, C.O.D
1st May 2016 7:42 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Sorry I can't help with the price though
1st May 2016 8:06 pm
de7158
Member Since: 20 Jul 2013
Location: Queensland
Posts: 15
Lift up the sill trim and the black plastic support under, and see if the originals are lodged amongst the cable bundle in the sill. Found all of mine there ...... not a bad idea to check as they could cut the cable insulation over time, especially on the corrugated roads we drive on.
Peter
1st May 2016 11:29 pm
Brucey
Member Since: 24 Oct 2015
Location: Bedfordshire
Posts: 137
I've just found most of mine missing, how do you lift that panel to access the cables and possible missing clips?
2nd May 2016 4:56 pm
Brucey
Member Since: 24 Oct 2015
Location: Bedfordshire
Posts: 137
In fact, think I just found the correct clips for the floor IPN500090
2nd May 2016 5:05 pm
de7158
Member Since: 20 Jul 2013
Location: Queensland
Posts: 15
Will have to remove side kick plate first then pull up the black cover up from the front. Will be fixed by a white plastic trim clip at the front and from memory another one beside the seat. I didn't remove the black cover completely, just lifted/twisted it up enough from the front to find the clips. A trim tool helps to reinsert the white plastic trim clips back.
Spread/open the metal clips before inserting as the act of clipping down the top scuff plate will push them back down if you're not careful.
Peter
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Sorry I can't help with the price though
