Member Since: 30 May 2013
Location: West Midlands
Posts: 275
GVIF Help
Please help !!!
Trying to get my GVIF to work a reversing camera...
When reverse is selected the sat nav screen switches but only black and white interference is showing have tried dip switches up and down to no avail !!!!!
Picture shows current switch options.......
Any help greatly received Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
30th Apr 2016 3:20 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
The car must go to sleep after a dip switch has been altered for it to take effect.
More info needed really, what model version is the GVIF?- operation of DS vary with model version. Have you got the rear camera connected to the grey rear camera input? - if you have DS 5 needs to be on, you must make this adjustment with power off and car asleep or it will have no effect.
Make double sure you have got the LR cable in correctly not upside down, it can be fitted both ways and comes out easily, this is the one that fits into the rear of the satnav under the seat.
Last edited by M3DPO on 30th Apr 2016 5:24 pm. Edited 2 times in total
30th Apr 2016 3:46 pm
Huge Halford
Member Since: 30 May 2013
Location: West Midlands
Posts: 275
Hi M3DPO
Model:QVL-GF08-V7.1
And yes the Grey cable is connected at the rear light.Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
30th Apr 2016 4:23 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Somethingwrong with the camera I suspect. Cable may be crushed or shorting to ground.Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
30th Apr 2016 4:25 pm
Huge Halford
Member Since: 30 May 2013
Location: West Midlands
Posts: 275
Hi Bodsy,
The camera worked ok straight into the sat nav screen
All I've done is remove the smb to rca cable and plug it into the GVIF Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
30th Apr 2016 4:34 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
Look at page 17 in the manual, I have put a link to it in my previous post.It can when others can't,
It will when others won't,
It goes where others don't.
30th Apr 2016 5:27 pm
Huge Halford
Member Since: 30 May 2013
Location: West Midlands
Posts: 275
M3DPO
Swapped the cables and that's got the camera on the screen
All the switches are off except number 7 does this seem right ?????
My remote controller doesn't seem to work ??
Probably me doing some thing wrong
Do I need the reversing screen up to alter the parking lines ???
Thanks for you Help Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
30th Apr 2016 6:33 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Yes you need camera on the screen to move them around Discovery 3 se gone
Range rover sport supercharged here:)
30th Apr 2016 6:57 pm
Huge Halford
Member Since: 30 May 2013
Location: West Midlands
Posts: 275
Thanks Geoffsnook
I'll try tomorrow
Is there a sequence of buttons to push to get the remote work ????
Someone said something like that
Or are the pulling my leg Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
30th Apr 2016 7:03 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
Have you got the remote "eye" cable plugged in and a good battery fitted in the remote correctly?-The parking lines cannot be set up without the remote working.
The second hidden menu to set lines and camera up is accessed slightly different on different versions, try pressing menu>up or down>menu in quick succession, or holding the "left" arrow for 2-3 seconds.
Beware when using the camera first time as it is not in the centre of the car and the view is deceptive, I positioned mine in the number plate at a slight angle to overcome this.
Do not be tempted to connect the can bus input change switch, it has disadvantages, I mounted the micro switch on the dash in line with the lock/unlock, park sensors off, etc switches.
Although you have got it working with the dip switches they are not correct, you may find you have all the av active(note I say active rather than on/off, you will see why later), which means when changing an av input from say camera 1 to TV or front camera you will have to press the change av input micro switch several times instead of just once as the button works on a forward rotary system i.e. input 1-2-3-4>1. You will have to turn the inputs off one at a time (2-3-4)by trial and error, remember to let the system go to sleep after each change, but if you are only using a reverse camera it will not matter. It gets quite complicated because technically the dip switch has to be turned off for an AV input to work, but the off position is down on some versions:shock: hope that makes sense.
You don't need the rear camera on to adjust the lines, but you do need it on to adjust the line of view; up,down left,right, larger, smaller, it will be logical when you get into the menu.
I have TV, MP4 video, DAB radio, and front and rear camera installed, I did this about 3/4 years ago and havent touched it since, it works extremely well with very good picture quality, I am working from memory.It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum