Member Since: 05 May 2016
Location: Gateshead
Posts: 473
14 HOURS TO GET 3 NUTS (photos)
Well everything is off and replaced
Well no it's not
I can't get the new pipe to marry up to the flange so it's off to the local exhaust fitters to finnish the downpipe the reason is you need to be underneath and at the side at the same time working alone it's not happening
But hear is the reason for 14 hours work 3 seized nuts in the most arkward places ever, and hear they are the little
My advise is if you fancy it go for it but it's soul destroying by your self with 2 might be easier I doubt
Let's hope it's can be sorted at the garage
The good points are everything that came off is copper slipped now and I know what the underneath looks like next time it's a short break in Scotland up by disco mickeys place don't mind servicing and routine maintenance but this is a step to far for a diy grease monkey
All transmission oil replaced
3 flash indicators
All timing belts changed
EPB serviced
De cat fitted
Wind deflectors
De-tango done
Tints fitted
Egr blanked
16th Jul 2017 3:25 pm
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
Henda I feel your pain ! I've literally gone and bought a 2 post lift today to take the body off to get at the cross over pipe nuts which are like your down pipe bolts. Paradoxically my downpipe came off easily !Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
16th Jul 2017 3:59 pm
Henda
Member Since: 05 May 2016
Location: Gateshead
Posts: 473
The work I don't mind it's the simple fact I can't Finnish it
There an idea loan out portable ramps to disco drivers got to be money there
Cheers All transmission oil replaced
3 flash indicators
All timing belts changed
EPB serviced
De cat fitted
Wind deflectors
De-tango done
Tints fitted
Egr blanked
16th Jul 2017 4:39 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
Re: 14 HOURS TO GET 3 NUTS (photos)
Henda wrote:
Well everything is off and replaced
Well no it's not
I can't get the new pipe to marry up to the flange so it's off to the local exhaust fitters to finnish the downpipe the reason is you need to be underneath and at the side at the same time working alone it's not happening
But hear is the reason for 14 hours work 3 seized nuts in the most arkward places ever, and hear they are the little
My advise is if you fancy it go for it but it's soul destroying by your self with 2 might be easier I doubt
Let's hope it's can be sorted at the garage
The good points are everything that came off is copper slipped now and I know what the underneath looks like next time it's a short break in Scotland up by disco mickeys place don't mind servicing and routine maintenance but this is a step to far for a diy grease monkey
I've got some nuts like those, you could have had them for free without going to all the trouble of taking yours off It can when others can't,
It will when others won't,
It goes where others don't.
16th Jul 2017 5:15 pm
Henda
Member Since: 05 May 2016
Location: Gateshead
Posts: 473
Is it worth getting them welded All transmission oil replaced
3 flash indicators
All timing belts changed
EPB serviced
De cat fitted
Wind deflectors
De-tango done
Tints fitted
Egr blanked
16th Jul 2017 5:46 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
Nass, it would be an even bigger challenge than getting them off It can when others can't,
It will when others won't,
It goes where others don't.
16th Jul 2017 9:26 pm
Henda
Member Since: 05 May 2016
Location: Gateshead
Posts: 473
Well all done the exhaust place retapped the studs new nuts new down pipe new clamp new hanger nice and quiet
The cost
Decat pipe £130 delivered with gasket
Exhaust place £50 to finnish
And 14 hours on my back
All in all quite an experience but all good now All transmission oil replaced
3 flash indicators
All timing belts changed
EPB serviced
De cat fitted
Wind deflectors
De-tango done
Tints fitted
Egr blanked
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum