Norwegian wood
Member Since: 18 Oct 2013
Location: Sandefjord
Posts: 66
  
|
| Torque setting front drive shaft D3 |
|
Hi!
I had to replace the pinion seal on my front diff. Haynes says the 12pc E10 8mm bolts torque setting to 80nm+60degrees. Is this correct? De-tangoed, G4 Winch, G4 Raised airintake, G4 Sumpguard, V8 brakes, 3 flash, clock on dash. Done belts, brakes, parkbrake actuator, transfer ecu, wheelbearings, air dampers, suspension arms, alternator, cruisecontrol,steelpan autobox++
|
 1st Dec 2015 10:48 am |
|
|
