Narpy's Grill Mod, Suspension Rods, Ultra guage, wrangler Goodyear duratracs 265/60/18, new thermostat, diff oils changed, brake switch new, aluminum rack floor, LED driving lights in foglights, rear camera, just need gvif unit, next on list! New front arb bushings, new front valve block, 191,000 miles.
23rd Nov 2015 7:09 pm
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
No sorry they are UK style adaptors which are totally diffrent to the USA ones looking at your pictureMY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
I'm interested as well. I may just make one up, shouldn't be too hard.
23rd Nov 2015 7:15 pm
mx468
Member Since: 12 Dec 2012
Location: Middletown, Rhode Island
Posts: 367
Which socket?
Hey ubp_sanity does your tow sockets look like mine? Which socket would I connect to? I currently use the lower one when I hook up my trailer. Or is the top one used when connecting a trailer with electric brakes?Narpy's Grill Mod, Suspension Rods, Ultra guage, wrangler Goodyear duratracs 265/60/18, new thermostat, diff oils changed, brake switch new, aluminum rack floor, LED driving lights in foglights, rear camera, just need gvif unit, next on list! New front arb bushings, new front valve block, 191,000 miles.
23rd Nov 2015 7:20 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Yes, I believe you can connect via the trailer electrics. Grab a suitable 7 pin plug and connect the charger ground and +12v as below.
Land Rover - Turning Drivers into Mechanics Since 1948
Last edited by Robbie on 23rd Nov 2015 7:25 pm. Edited 1 time in total
23rd Nov 2015 7:21 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
According to this page there is no permanent 12V available in the North American connectors.
So you cannot use it as a connection to the battery for charging 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
I have the same setup on mine. But it looks like the 12V pin is switched via the ignition.
23rd Nov 2015 7:27 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
Good old conflicting information
Grab a meter and check if it is ignition switched or permanent. If permanent then you're set 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
23rd Nov 2015 7:28 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Some NAS 7-pins are battery live, some are switched. The direct-to-battery 12v goes through the trailer module on the NAS LR3 so it either it is switched at the module, or it isn't, depending on how the module is configured. A quick check with DMM would answer the question.
Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum