Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Maintenance & Mods (D4)

Rear centre vent trim replacement
Post Reply  Down to end
Page 1 of 1
stick
 


Member Since: 13 Jan 2010
Location: hants
Posts: 604

United Kingdom 2010 LR4 3.0 TDV6 HSE Auto Izmir BlueLR4
Rear centre vent trim replacement

I have broken the vents and ferrule mechanism in the back by leaning too much timber against it.
I think I can source a replacement from Ebay, but cant find anything telling me how to remove trim and replace. Can anyone tell me or point me to a video? Thanks


Click image to enlarge
 d4 HSE  
Post #23767697th Sep 2024 11:56 am
View user's profile Send private message View poster's gallery Reply with quote
fp64
 


Member Since: 29 Jan 2024
Location: Wales
Posts: 8

Wales 2014 Discovery 4 3.0 SDV6 HSE Auto Mariana BlackDiscovery 4

Reading the workshop manual, it looks like you need to unscrew and remove the centre console cover to access the screw which holds the face with the vents, and after that it's just clips. I haven't done this before, so have a look at the below pics for yourself before pulling on anything too hard Laughing

The below is part of the floor console removal and installation procedure. I'm hoping step 11 (and steps 6 or earlier) are not necessary to access the screw in 13. Hopefully once the panel is off you can remove the vent assembly from it and replace just that (?) let us know of your findings for future reference Very Happy

Good luck Thumbs Up

Click image to enlarge

 Got lots to learn!
2014 Discovery 4 HSE  
Post #23768848th Sep 2024 10:49 pm
View user's profile Send private message View poster's gallery Reply with quote
stick
 


Member Since: 13 Jan 2010
Location: hants
Posts: 604

United Kingdom 2010 LR4 3.0 TDV6 HSE Auto Izmir BlueLR4

Thank you for this.
Looking at it, it appears that I need to do number 12 to get the console storage pocket out of the way. 12 makes it look like i need to remove 2 screws from the front edge. There is a plate on the front edge above the cupholders. Is there a piccie somewhere that shows me how to remove that plate please?

THanks d4 HSE  
Post #23768929th Sep 2024 8:08 am
View user's profile Send private message View poster's gallery Reply with quote
fp64
 


Member Since: 29 Jan 2024
Location: Wales
Posts: 8

Wales 2014 Discovery 4 3.0 SDV6 HSE Auto Mariana BlackDiscovery 4

Oh dear I thought it was accessible through the (removed) cover, but I think you're right... Sad

Either way, the process for removing this part appears a bit involved (a lot of pictures etc) so I'll DM a file Smile Got lots to learn!
2014 Discovery 4 HSE  
Post #23769469th Sep 2024 6:40 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site