Member Since: 22 Jan 2007
Location: Northwest
Posts: 34
Centre cap removal
Can the centre caps be removed without removing the wheel from the disco, should have changed them when I changed the alloys but forward planning was never a strong point.
Cheers
I don't fancy taking the wheel off again, the winding of the jack has took three years off the life of my shoulder joints
25th Aug 2007 9:11 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132
You could try gaffer tape rolled up sticky side outermost to pull them off but think you might be losing another 3 years!
Exercise is good for you (so they say)!!!
25th Aug 2007 9:19 am
Biffa1969
Member Since: 22 Jan 2007
Location: Northwest
Posts: 34
cheers I'll give it try, if not I'll need some of that leftover cider to replenish lost body fluid.
25th Aug 2007 9:58 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
25th Aug 2007 10:30 am
stapldm
Member Since: 11 Sep 2006
Location: Swine Town
Posts: 2330
I've not tried it for this specific job, but I'd probably try using a hot glue gun to bond a wooden stick to the cap. I believe some people have used this method to pull out dents. Hot glue tends to peel off most smooth hard surfaces when cold without leaving a mark - use a blunt scraper to undo an edge and then gently pry the glue back off. I often finish off any straggly bits with my fingernals.Dr. Ian Malcolm:
"Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should."
Transgenic tomato anyone?
25th Aug 2007 7:37 pm
Nigel Tracey
Member Since: 04 Nov 2006
Location: Lausanne
Posts: 395
Biffa,
Do you mean the plastic caps in the centre of the wheel with the LR logo on ?
If so then no probs to remove without removing the wheel. You just need a very small screw driver (very, very small) Forced down the side it gives enough side leverage to push them out.Mrs Jones ? We've come for your Liver
25th Aug 2007 10:50 pm
zebadee
Member Since: 15 Feb 2006
Location: The Magic Roundabout
Posts: 1392
Yeah this is easy peasy !!!
No need to take off the wheel to do this
I just used the tip of the blade of my Leatherman Multi-tool. You won’t damage anything if you’re careful, certainly not the alloy anyway.
26th Aug 2007 3:51 pm
Biffa1969
Member Since: 22 Jan 2007
Location: Northwest
Posts: 34
thanks for the advice, unfortunetly the gaffer tape didn't work, but used a tiny electrian's screwdriver with a bit of tape around to protect the alloy. It worked a treat, now very happy and the black logo centre caps look the part.
27th Aug 2007 10:32 am
Nigel Tracey
Member Since: 04 Nov 2006
Location: Lausanne
Posts: 395
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I don't fancy taking the wheel off again, the winding of the jack has took three years off the life of my shoulder joints
