Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
Tree sliders as per e bay 221881246701
This post is just to gauge interest, nothing will be done until someone has looked at or possibly tried them on the car to check quality, fit and that they do stick out far enough.
I have nothing to do with this person other than seeing the add and asking about a group buy.
Right gents I have had a reply from Martin who is happy to go ahead with a group buy so I will start a thread gauging interest in these.
This is the e bay number eBay Item No. eBay Item No. 221881246701
As you will see they are on for £260 inc delivery, the seller has agreed that if we can get a group buy of more than 10 he will do them at £180 plus £20 deliver or you can collect direct from him. I approached Martin and suggested £200 a set plus delivery and £20 goes to the forum but Martin being Martin as said he would be happy with £10 only per set to the forum Bow down Bow down
They are 4mm plate and 3mm wall tube, I have not seen any in the flesh myself as he is a long way from where I live but he is happy for a forum member to go round to them Shirebrook Nottinghamshire and look or even try a set on the car.
Madrilleno has already said they are just up the road and he may go and have a look so I will PM him to see if he can check them out.
Baz2236 is also picking a set up from Peterborough so will see what he thinks as well before we go ahead with the group buy.MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
Last edited by Russell on 14th Sep 2015 10:10 am. Edited 1 time in total
14th Sep 2015 9:52 am
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
Should have more info tomorrow - will see how they fit and report back.There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
14th Sep 2015 10:07 am
Russell
Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
Thank you excellent newsMY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
14th Sep 2015 10:09 am
Perdi's Dad
Member Since: 04 Sep 2013
Location: Hertfordshire
Posts: 188
This looks like it may be a really good buy. The pay off me that always wants every thing built really heavily would bet interested in the slightly thicker versions that may be available for about £50 more.
Are there any others like me that would prefer this?
By the way. .. I'm not trying to cause problems. Always appreciate the effort that goes into these buys!
PaulUpgrades so far - , rear ladder from prospeed , front and rear light guards G4 style roof rack and 4 lightforce spots on the rack! Xenon lights
14th Sep 2015 12:57 pm
radders89
Member Since: 30 Aug 2010
Location: West Sussex
Posts: 1051
Paul I would pay an extra £50 for thicker versions. MY15 D4 SDV6 HSE Corris Grey - Gone
MY05 D3 TDV6 SE Zambezi silver Auto Alpaca leather - Gone
MY02' Seat Leon 1.6s Metallic Black cloth trim with a hint of mould
Club Sandwich
Women... Can't live with em, can't kill em...
14th Sep 2015 1:25 pm
Baz2236
Member Since: 07 Apr 2014
Location: Ely, Cambridgeshire
Posts: 403
When I get mine Sunday I will take some pics and let you know what there like. I had tree sliders for my 90 from these guys and they got quite a lot of abuse through the years.www.pcsupportservicez.co.uk
14th Sep 2015 2:03 pm
Kingmav66
Member Since: 20 Jul 2010
Location: Gloucestershire
Posts: 1349
Very cheap....... It will be interesting to see what diameter tube is used, and how the powder coating looks after 6 months
14th Sep 2015 7:35 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Silly questions
1, how are they fixed to the car?
2, do they replace the plastic cill's?
15th Sep 2015 5:51 am
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Yes, they replace the sill covers, they are bolted on with about 10 bolts each side. The bolt holes are already there. You need to remove the sill covers and drill out the plastic clips and then fit
15th Sep 2015 5:59 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
lynalldiscovery wrote:
Silly questions
1, how are they fixed to the car?
2, do they replace the plastic cill's?
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Tayaste and Robbie thank you
15th Sep 2015 3:39 pm
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
So, went along to see Carl after work today. Thoroughly nice chap, and has a good amount of experience in sheet metal work.
The sliders looked to be of good quality for the price. The welds appeared to be fairly consistent and neat. Materials were as earlier a stated, 4mm plate an 3mm wall tube. He has used mild steel for construction, comensurate with the cost. Powder coating was well applied and even. The choice of mild steel will mean that corrosion will be a problem later if scrapes are not treated regularly.
There are two detrimental points.
1. The tubes do not protrude far enough to protect the doors from careless opening of car doors.
2. More importantly, the bottom seal strip on the doors stands off by about 5mm at the extremities, and about 10mm in the middle. Whilst these strips are not part of the wading seal system around the door opening itself, i believe that this will allow salt spray in winter to enter under the door more than it should.
I also suggested that he lengthen the tubes as far as possible.
Carl is aware of these points and is giving thought to how he can change the design to address them.
As for me, I'm going the hang on and see what he comes up with.There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
15th Sep 2015 6:43 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
All tree sliders change the gap with the door seal - making it either larger (almost all designs) or smaller (latest ProSpeed). The trick is to replace the outer seal to as required to correct the gap.
The sheet metal has to sit tight on the vehicle so that the loads are spread evenly and not taken by the fasteners alone.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
The contour follows the sill pretty well. I'm aware of the custom seals, but these are what might be called a beta version. We discussed the question of producing custom seals, but this would add significant time and cost to the design. Instead, Carl us considering modifying the profile slightly to produce a ridge mating with the seals. However, this was only part of some ideas we were throwing around.There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
15th Sep 2015 6:56 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
