Member Since: 21 Nov 2010
Location: Aberdeenshire
Posts: 460
everyone likes a picture
Purchased a disco 3 with a knocking engine so decided to take the body off to replace the engine and landed doing more than I planed doing , (some more)
Don't know what iv done to the order of the pics , it's took me ages to upload them , there will be more pics when I get more done
Last edited by snailcove on 15th Jun 2015 8:56 pm. Edited 1 time in total
17th May 2015 8:55 pm
Numpty
Member Since: 18 Aug 2012
Location: Bolton
Posts: 673
Be useful to put the full set in a high def album to help those of get a better idea of the hidden bits of a disco
17th May 2015 8:58 pm
J@mes
Member Since: 10 Nov 2008
Location: Bomber County
Posts: 4547
Braver man than most 2014 D4 XS
2005 D3 SE - Gone
17th May 2015 9:03 pm
snailcove
Member Since: 21 Nov 2010
Location: Aberdeenshire
Posts: 460
I have no idea how too that , iv got around 150 pics and about half finished needle gunning sanding priming topcoat and putting parts back on again
17th May 2015 9:04 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Top job doing all that , let us know how many bits you have left when it all gets back together Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
17th May 2015 9:15 pm
DN D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2326
I'd love to have the space and time to do that,(preferably without the engine change ),as it is, I can hardly find a walkway through my garage. ..........Keep up the good work snailcove.
17th May 2015 9:18 pm
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4286
J@mes wrote:
Braver man than most
Some might say crazy A happy childhood ... is the worst possible preparation for life.
18th May 2015 10:19 am
snailcove
Member Since: 21 Nov 2010
Location: Aberdeenshire
Posts: 460
I get the feeling I must be mad to bother
18th May 2015 7:53 pm
snailcove
Member Since: 21 Nov 2010
Location: Aberdeenshire
Posts: 460
Some more
19th Jun 2015 8:10 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20787
Member Since: 10 Jan 2015
Location: Angus
Posts: 1201
Respect. Went for a job as a human cannonball. Not the right calibre.
19th Jun 2015 9:05 pm
snailcove
Member Since: 21 Nov 2010
Location: Aberdeenshire
Posts: 460
Upside down lol , got it running yesterday and it's running sweet with only three half thrust washers
19th Jun 2015 10:08 pm
MGCarr
Member Since: 15 Jul 2014
Location: Lancashire
Posts: 703
Fantastic post but as there does not seem to be a 2 post lift anywhere in sight how the f k did you get the body off and how are you going to get it back on again?
1997 Defender 90 for the kids and I to have a go at some competitive off road RTV and Tyro trials, daughter picked up her first trophy over the August Bank Holiday.
Previous Land Rover history
1996 P38 4.6 V8 Autobiography
1996 Discovery TDi 300
1972 Range Rover 3.5 V8
LWB Hard Top Series 3
LWB Truck Cab Series 2A
Not been without a Land Rover for over 40 years - I must need therapy!
20th Jun 2015 2:16 am
LeighW D3 Decade
Member Since: 31 Jan 2006
Location: Brisbane, AUS
Posts: 920
MGCarr you might like to check out snailcove's gallery for the answer to your question. Here's one I prepared earlier.
The old girl is on her third engine...
* first ran a bearing (design failure in original engine)
* second had a failure of the water outlet on top of the engine (pls check yours)
20th Jun 2015 5:38 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum