Just to follow up, these are now fitted and working brilliantly.
I followed GM's advice on the wiring with a couple of mods. I connected up the green and grey wires as I don't have the cornering lights. Just waiting to try them out in the dark
For the wiring, I cut the cables back to about 6 Inches from the control box and fitted 2-way super-seal (AMP) connectors to make disconnection/removal easier. Also made installing a bit easier as I was able to run the cables then connect up at the end.
Conclusions ? Fully recommended Morris Dancers: Drinkers with A Dance Problem
1st Jun 2015 12:35 pm
lee821974
Member Since: 08 Oct 2016
Location: Hampshire
Posts: 13
Mine all done too
Got mine fitted too now.
Really wanted to use the "Dim' function but couldn't find a 12v feed in the headlight plug to activate the "Dim".
Anyone know how?
Thanks
8th Mar 2017 10:16 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Re: Osram Fog Light Fitting
Grease Monkey wrote:
ROY_H wrote:
Just treated myself to a set of Steve's Osram Fog/Driving lights and was wondering if anyone else has fitted a set and can recommend any pick-up points for all the wiring
I've worked out what all the wires connect to but want to try to fit as neatly as possible. assuming the control box is best placed near the battery fuse-box then the remaining wiring run around to connection points, certainly seems to be plenty of length.
Hi ROY_H
I fitted mine last year and they still look great, my D4 is an early pre-production model, so the wiring may differ from yours?
The controller was mounted behind the R/H Headlight, the white wire was soldered to the red/orange trace wire at the R/H Headlight plug. There is a switched live at the unused plug (pollution sensor?) in front of the radiator, the blue wire was soldered to this. There is a body earth point behind the R/H headlight so the black and brown wires were connected to this. Finally, the fused red wire was run to the battery. As I already have cornering lights I didn't use the green or grey wires. The looms that are attached to the controller are all plug and play, and are plenty long enough.
Hope this helps
G.M.
I'm closer to install the Osram but I noted the I'll need to use the dremmel to enlarge hole in the bottom lights bracket....Discovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition
IID Pro MV License
8th Mar 2017 11:14 pm
Gilly1
Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359
Hi, has anyone fitted the osram fogs to a face lift D4. I presume the fittings are the same once the black surround is off, I was also hoping someone might have a how to dummies guide on wiring for all 3 options connected. Drl,fog,corner assist.
2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do,
Are these the OSRAM lights that Powerful sell? I asked the question whether they would fit the D4 and they said they're only suitable for RRS.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
18th Apr 2018 4:48 pm
Gilly1
Member Since: 09 Sep 2015
Location: Somerset burnham on sea
Posts: 359
No I ordered mine from site sponsor advanced factors. Think suitable for d3/D4/freelander 2/rrs. ๐
From what iv read some need a slight modification to mounting points but for D4 itโs a tight fit but with out modification.2015MY discovery 4 se tech with factory black pack.
With added
Rse, tv, electric memory seats, rear camera, heated steering wheel,
Headlight dip assist, remote FBH, led door light pack,easy lift kit,osram front fog/drl/active cornering lights. and whatever els I can find to do,
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum