Pesh
Member Since: 06 May 2016
Location: Hampshire
Posts: 84
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Auto Rimini Red 2005 Discovery 3 TDV6 HSE Auto Rimini Red](../images/veh/rimini_red.gif)
|
[Wanted] Terrain/Hi Low range switch pack |
|
Hi,
Does any body have the centre console switch pack available for a D3?
My low range won't engage and I'd like to swap out the switches.
Regards
Pesh
|
19th May 2016 12:02 am |
|
|
Slovsdisco
Member Since: 19 Dec 2018
Location: Cornwall
Posts: 44
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 Base 5 Seat Manual Zermatt Silver 2005 Discovery 3 TDV6 Base 5 Seat Manual Zermatt Silver](../images/veh/zermatt_silver.gif)
|
I’m having the same problem. My switch isn’t doing anything. No change of lights, no dash info. Just manually toggles but is dead. Did you get anywhere with this? Did than you just buy one off eBay and slot it in? Or does it need mapping etc?
|
19th Dec 2018 9:58 pm |
|
|
PCT3
Member Since: 13 May 2017
Location: Kent
Posts: 144
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Auto Zambezi Silver 2007 Discovery 3 TDV6 HSE Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Re: [Wanted] Terrain/Hi Low range switch pack |
|
Pesh wrote:Hi,
Does any body have the centre console switch pack available for a D3?
My low range won't engage and I'd like to swap out the switches.
Regards
Pesh
Think I have one of these in the garage Discovery 3 HSE 07
Discovery 1, Search & Rescue SE4x4 Responce
Fiat Decato motor home
Mazda MX5
|
12th Mar 2019 5:20 pm |
|
|
Slovsdisco
Member Since: 19 Dec 2018
Location: Cornwall
Posts: 44
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 Base 5 Seat Manual Zermatt Silver 2005 Discovery 3 TDV6 Base 5 Seat Manual Zermatt Silver](../images/veh/zermatt_silver.gif)
|
Thanks for your reply! I did end up sorting this though... turns out it had been filled up with a sticky drink in a previous life! Took the switch panel apart by separating the mechanical lever housing from the circuit board. Cleaned the circuit board with contact cleaner and a light abrade on the contacts, washed the levers in soapy water, dried it and re-assembled. Bobs your uncle, Fanny’s your aunt!
One little nicety I did in the process was clean out all the old silicone grease from the rotary switch and reapplied. It gave the toggle a much more positive feel.
Hope this helps someone! As before I did this, I was ready to start booking the disco in for a fault find with a possible transmission fault Landrover discovery 3, 2005, TDV6, manual, 5 seats
|
12th Mar 2019 5:34 pm |
|
|