Member Since: 10 Nov 2011
Location: lanark
Posts: 958
Many thanks but have just resorted to a 4” grinder! ( apologies 100mm)Once you have defeated the idiots any job is half done. Pity there are so many idiots to defeat.
22nd Apr 2019 11:19 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13671
Hi
Don’t know if it helps , Found using a dremel with the flexi shaft attachment works really well getting drop links off , using the thin cut off blades , zips through in less than 5 x mins and saves u wielding a 4inch grinder around
22nd Apr 2019 11:30 am
Mogwyth
Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976
gstuart
Exactly how I did one of mine yesterday that was proving stubborn, also worked for one of the upper arm nuts that wouldn't play.==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
22nd Apr 2019 1:23 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13671
Hi mogwyth
Happy days and must admit couldn’t believe how quick it zipped through the drop link
Wondered that about the wishbone nuts if using the dremel would be easier , may i ask plse did u cut the nut sideways so ended up in two halves then used a chisel to knock it off the bolt
Hope that makes sense
Think many of us have experienced the nightmare of getting that upper back bolt out of the wishbone
Must admit having a dremel is one if the best tools I’ve bought
23rd Apr 2019 5:03 am
Mogwyth
Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976
Only one cut sideways and a couple of blows with a chisel.==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
23rd Apr 2019 6:15 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13671
Nice one, many thks,
Plus when I come to do other wishbones in the future will invest in one of these zip cutters
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum