Member Since: 22 Jun 2008
Location: Cumbria
Posts: 762
Seats enabling
Could HSE front seats be enabled on a Graphite model?If you are not part of the solution,you are part of the problem!
D4 Graphite
Ford F-150 Raptor
Audi RS6
Hymer Exsis
29th Jun 2019 6:49 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6402
by HSE you meant?
what functions are you after?
electric / memory / heated with bolsters? or something else
having correct modules/loom attached or donor seats and IID Tool yes should be no problem
G
29th Jun 2019 7:14 pm
Bruce
Member Since: 22 Jun 2008
Location: Cumbria
Posts: 762
Memory and the basic adjustment for comfort, the Graphite seats are heated alreadyIf you are not part of the solution,you are part of the problem!
D4 Graphite
Ford F-150 Raptor
Audi RS6
Hymer Exsis
29th Jun 2019 8:39 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6402
they need to be electric for memory
do you have bolsters on them?
if you wanna enable memory you need mem module installed, the door switch, as well as replace the looms under seat to relevant cablibg which is best done with seat outside the vehicle
g
29th Jun 2019 9:59 pm
Bruce
Member Since: 22 Jun 2008
Location: Cumbria
Posts: 762
I haven’t bought the seats yet, just looking at options, is it all plug and play with the module and loom? Or does it involve major surgery.If you are not part of the solution,you are part of the problem!
D4 Graphite
Ford F-150 Raptor
Audi RS6
Hymer Exsis
30th Jun 2019 6:50 am
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6402
if you get seats with all functions it would also require CCF editing to make sure car knows what it is operating with
30th Jun 2019 8:21 am
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1215
I fitted HSE memory seats to my XS D4 door switches and memory module and works great
30th Jun 2019 9:16 am
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1073
Stephen, did you have to modify wiring?
I have a GS and fitted HSE memory seats, the door buttons but I just get bursts. Heating and bolster inflation all works OK and the passenger seat is perfect.
I havent updated the CCF though, as I dont have an IID tool.
30th Jun 2019 9:49 am
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6402
you have to mod CCF for thos to operate properly as with mem seat most signals go via controller
G
30th Jun 2019 10:06 am
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1073
Thanks.....I guess I need to shell put a few hundred...again
30th Jun 2019 10:16 am
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1215
Mine worked without updating the files but I did it anyway as I have the IDD tool , but on my D3 it was a GS and when doing upgrades there was wiring that had to be added,
30th Jun 2019 11:16 am
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1073
Yes its all a bit odd. To be honest, I gave up trying a while ago, and no one really knows the answer.
Famousfive was very helpful but I think he has the same issue.
The general consensus is that the D4 should not need extra wiring like the D3, but I dont think anyone is 100% sure!
But even though I have given up, I guess I should at least update the CCF
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
30th Jun 2019 11:43 am
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1073
There are so many modules I get confused?
Which one is the memory module and I will go and look!
30th Jun 2019 11:44 am
Philip1972
Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1073
I have just been out and I am pretty sure the memory module is there.
It had a grey plug and a green plug and is tucked to the underside of the front seat cushion.
So what’s next?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
