tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
  
|
| Nanocom Programme Error when updating. |
|
Just tried updating the nanocom to 1.28.b2
Basically, all was going well until the very end and then it came up with a Programme error 
Now the NanEvo isn't responding and the software is showing device as not attached.
I've posted on the BBS forum for some help which no doubt will be along shortly.
I'm just wondering if anybody else has had this issue previously and may be able to help me whilst im waiting 
|
 20th Jan 2015 5:21 pm |
|
|
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
|
Doesn't matter......Looks like I sorted it.
It appears holding the left bottom of screen forces it into kernal mode.
Trying the upgrade again
Here Goes..
|
| 20th Jan 2015 5:28 pm |
|
|
BBS SPY
Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
 
|
Glad to hear that you got yourself sorted so quickly tayaste
The Nanocom actually has quite a few tricks up it's sleeve to recover from any corruption or error during updating, all detailed in the upgrade help files 
|
| 20th Jan 2015 5:42 pm |
|
|
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
|
Drama over... Updated second attempt fine
|
| 20th Jan 2015 5:44 pm |
|
|
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
|
Colin, is it fine to overwrite the sd card files after deleting or is it necessary to format card first?
|
| 20th Jan 2015 5:46 pm |
|
|
BBS SPY
Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
|
Quote:Drama over... Updated second attempt fine
I never had any doubts
It should be fine to just overwrite files on the SD card.
But of course if something goes wrong, now we have created the super simple to use utility that correctly formats an SD card for the nanocom and adds all the base files, it's no problem to sort in any event
Have you checked out some of the Nnewer comparison features on Genesis yet
|
| 20th Jan 2015 6:26 pm |
|
|
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
|
Not sure. I did notice compare button is struggling to work for me. Used to work first time but now I have to go back and forth otherwise it gets stuck in the circles going round and round
|
| 20th Jan 2015 6:55 pm |
|
|
karpouzih
Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
|
Hi Tayaste,
We have just finalized a new structure to Genesis to avoid the roundabout you mention. Genesis was put together modularly and we realized that after its expansion its user friendliness could be improved. We are on final tests, and should go live the latest Monday. With the updated site you will enter your VIN only once at the start and away you go.
Hope this helps,
Chris http://nanocom-diagnostics.com/
http://nanocom.blackbox-solutions.com/index.php/forum/index
http://www.blackbox-solutions.com/
Last edited by karpouzih on 27th Jan 2015 10:00 pm. Edited 1 time in total
|
| 27th Jan 2015 4:33 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
|
@tayaste
Also don't forget that if you want your screen rotated, to select the option prior to updating, I always use this option as it makes it easier to hold with the cable in the correct position.
Flack
|
| 27th Jan 2015 5:17 pm |
|
|
|
|
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
|
I've been using the screen rotation. It does put put the cable on the proper side of the box 
|
| 27th Jan 2015 10:26 pm |
|
|
|
|
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
|
Just had a play Chris .. Much better
|
| 29th Jan 2015 7:24 pm |
|
|
|
|
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
|
One from me Chris .. When I log onto genesis I have to go digging for VIN numbers to manually type in. Could you have a drop down box similar to topix with favourites and recents so, as soon as I log in to genesis I can access car profiles to save me hunting for the VINs I've written on pieces of paper everywhere
|
| 29th Jan 2015 9:36 pm |
|
|
