Member Since: 07 Jun 2011
Location: Herts
Posts: 277
Removing the wood effect Facia kit
I've got a walnut trim on the vents and dash on my recently acquired D3, and I really don't like it.
I've had a little pull and the top vent parts come away very easily. The silver plastic underneath looks fine to me.
The rest is rather stuck on, does anyone know what they stick this stuff on with, and whether I can extract the kit intact? More importantly, whether what they've used damages the plastic underneath?
Had a little search but could not find...*now enjoying* D5 Namib Orange HSE 68
Disco4 Kaikoura Stone HSE 16
Disco4 Nara Bronze HSE 11
Disco4 Nara Bronze XS 10
Disco3 Rimini Red HSE 07
17th Jun 2011 2:53 pm
highbayrack
Member Since: 09 Jul 2008
Location: Northamptonshire
Posts: 2776
Use a Hair Dryer to warm it up first On a mission to find the perfect Pork Pie. Just Found it (I think)..(Yes I have)
Official product sponsor for "Bloodhound SSC" 1000+ mph world land speed record
17th Jun 2011 3:02 pm
Discoed
Member Since: 16 Jun 2010
Location: Yorkshire
Posts: 1020
I recently removed mine - came off OK with care.
17th Jun 2011 3:06 pm
tonigmr2
Member Since: 07 Jun 2011
Location: Herts
Posts: 277
Cheers for that I'll have a go. *now enjoying* D5 Namib Orange HSE 68
Disco4 Kaikoura Stone HSE 16
Disco4 Nara Bronze HSE 11
Disco4 Nara Bronze XS 10
Disco3 Rimini Red HSE 07
17th Jun 2011 3:29 pm
KeroseneJunkie
Member Since: 12 Aug 2011
Location: Herts.
Posts: 15
tonigmr2,
How did it go? I've just bought a used D3 with a nasty faux carbon fibre dash trim kit fitted, and I'd also like to remove it.
Thanks
Ian
26th Aug 2011 2:23 pm
disco3kenny
Member Since: 19 Jan 2008
Location: Here
Posts: 1007
Member Since: 21 Jul 2011
Location: Newcastle
Posts: 94
Hi lundoz
Took my h trim out 2 weeks back.
No tools needed just a good grip!
Start at the bottom corner as soon as 1 clip loosens the rest will follow.
If your lucky all the clips will stay in place.
Took mine to a local body shop and got it painted piano black.
Really changes the look of my 05 se.
Well pleased with it. Best mod I've done.2005 manual se
black badges
side steps
Interior LEDs from hids4u
Piano black interior
Silver gear and cup holders
smoked indicators
Smooth steering wheel off TLO mmmmm smooth
31st Aug 2011 4:13 am
tonigmr2
Member Since: 07 Jun 2011
Location: Herts
Posts: 277
Hey guys
Haven't got round to removing all the old trim yet, might do it later this week!
Comes off easy so far.
I'll be flogging it when it's off.
T*now enjoying* D5 Namib Orange HSE 68
Disco4 Kaikoura Stone HSE 16
Disco4 Nara Bronze HSE 11
Disco4 Nara Bronze XS 10
Disco3 Rimini Red HSE 07
31st Aug 2011 2:01 pm
tonigmr2
Member Since: 07 Jun 2011
Location: Herts
Posts: 277
Well that was a mixed fortunes type operation.
It all came off fine. (See pic).
Click image to enlarge
But I see why it was on now...drivers side air vent is butchered.
Click image to enlarge
So now I need some other trim kit to cover it...or a new one!
Thinking of removing all the grey stuff and getting it painted, black sounds interesting.
Do people think red would be too much....
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated *now enjoying* D5 Namib Orange HSE 68
Disco4 Kaikoura Stone HSE 16
Disco4 Nara Bronze HSE 11
Disco4 Nara Bronze XS 10
Disco3 Rimini Red HSE 07
Black it is , it's very subtle , I was lucky to get mine with it in already , and no the red would stick out like a sore thumb, the whole point is it very subtle mod , the black .2008 ,hse, it does what it says .
1st Sep 2011 4:14 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Don't think they cost that much to replace - listed at £18 inc on Britpart and TLO is usually less than them.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 06 Feb 2011
Location: Oslo
Posts: 75
Im thinking of removing the plastic covers and painting it black but how do I remove it?
The left and right airvents are just plug ang play, but what about the center?
I got the 2006 mod so the center and the center vents are a onepiece....
9th Sep 2011 4:48 pm
Lundoz
Member Since: 06 Feb 2011
Location: Oslo
Posts: 75
I got the center of but the damn vents are being a dick! Any idea of how to get it of? Do I need to disconnect the wires for the lightswitch?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
