therealboss
Member Since: 21 Mar 2014
Location: Co Carlow
Posts: 1958
  
|
| LR aftermarket bluetooth kit help. |
|
To cut a long story short I bought a brand new LR aftermarket kit of ebay for a song but it's been sitting in the garage for a while as I didn't have the time to fit it.
I'm going to the LR show in Peterborough and was hoping for someone to help me fit it, after mailing Wiggs I understood that the biggest job was fitting the loom as so much of the dash has to come out.
I have fitted the loom and both modules but am missing the mike and I have a few questions.
1) I'm looking for a mike for the LR aftermarket bluetooth kit, as my one was missing, have you got one for sale, if so message me.
2) The plug at the end of the loom (by the gear lever), what do I plug it into or do I just blank it off?
3) Would anyone be will ing to fit the buttons to the steering wheel for me at Peterborough and help me finish off the job and test it all out? (willing to pay someone to get this job finished).
4) Has anyone got a D4 Bluetooth module for sale as I understand it, the D4 one is better than the D3 one. Dale
Mods to date.
D4 Rear Lights
Xenon Lights fitted & De-Tangoed
RAI, V8 Brake Upgrade, AMK Compressor
Beanie Grill
ProSpeed Roof Rack & Ladder
ProSpeed Tree/Rock Sliders
Disco3.co.uk Orange Sticker
ATR's Fitted
Club Blackvue
|
 12th Sep 2014 10:23 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
Dale
Quite happy to fit your steering wheel buttons .. Only takes a few mins
You can't fit a D4 module to the aftermarket kit... There diffetent systems G4 Gone ...but not forgotten
|
| 12th Sep 2014 11:46 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
I might have a spare mic . Will check in morning G4 Gone ...but not forgotten
|
| 12th Sep 2014 11:48 pm |
|
|
therealboss
Member Since: 21 Mar 2014
Location: Co Carlow
Posts: 1958
|
Cheers Wiggs, can I take you up on your offer to fit the bottons.
On the D4 module, whats involved in the D3 to D4 BT upgrade? Dale
Mods to date.
D4 Rear Lights
Xenon Lights fitted & De-Tangoed
RAI, V8 Brake Upgrade, AMK Compressor
Beanie Grill
ProSpeed Roof Rack & Ladder
ProSpeed Tree/Rock Sliders
Disco3.co.uk Orange Sticker
ATR's Fitted
Club Blackvue
|
| 13th Sep 2014 7:54 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
A lot easier to fit the factory kit
Just need a bit of most cable ( I can do a plug and play one )
Power to the module and activate it G4 Gone ...but not forgotten
|
| 13th Sep 2014 7:59 am |
|
|
therealboss
Member Since: 21 Mar 2014
Location: Co Carlow
Posts: 1958
|
Wiggs, could you PM me your phone number as I have a few questions, I'll willing to pay for the D4 upgrade but have some questions.
Thanks
Dale Dale
Mods to date.
D4 Rear Lights
Xenon Lights fitted & De-Tangoed
RAI, V8 Brake Upgrade, AMK Compressor
Beanie Grill
ProSpeed Roof Rack & Ladder
ProSpeed Tree/Rock Sliders
Disco3.co.uk Orange Sticker
ATR's Fitted
Club Blackvue
|
| 13th Sep 2014 8:42 am |
|
|
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
|
How do you know if you have a land rover factory kit or a aftermarket kit?
Pete. IID, webasto software and workshop facility's available.
|
| 13th Sep 2014 3:06 pm |
|
|
therealboss
Member Since: 21 Mar 2014
Location: Co Carlow
Posts: 1958
|
From what little I know, I think if the two modules sit either side of the transmission tunnel, then its the LR aftermarket kit. Dale
Mods to date.
D4 Rear Lights
Xenon Lights fitted & De-Tangoed
RAI, V8 Brake Upgrade, AMK Compressor
Beanie Grill
ProSpeed Roof Rack & Ladder
ProSpeed Tree/Rock Sliders
Disco3.co.uk Orange Sticker
ATR's Fitted
Club Blackvue
|
| 14th Sep 2014 9:20 am |
|
|
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
|
if you pair with 2121 then its factory fit , and if you pair with 0000 then its aftermarket 
|
| 14th Sep 2014 10:27 am |
|
|
therealboss
Member Since: 21 Mar 2014
Location: Co Carlow
Posts: 1958
|
I have the after market kit, installed it the other day, just missing a mike for it.
One question still left unanswered, the plug at the end of the loom (by the gear lever), what do I plug it into or do I just blank it off, also what is it for? Dale
Mods to date.
D4 Rear Lights
Xenon Lights fitted & De-Tangoed
RAI, V8 Brake Upgrade, AMK Compressor
Beanie Grill
ProSpeed Roof Rack & Ladder
ProSpeed Tree/Rock Sliders
Disco3.co.uk Orange Sticker
ATR's Fitted
Club Blackvue
|
| 14th Sep 2014 11:04 am |
|
|
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
|
Mines paired with 0000 so guess its aftermarket. Is there any updates or ways to make it any better?
Pete. IID, webasto software and workshop facility's available.
|
| 14th Sep 2014 2:38 pm |
|
|
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
|
Yep take it out and retro fit a D4 module
|
| 14th Sep 2014 2:48 pm |
|
|
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
|
What will i need other than the modual?
Pete. IID, webasto software and workshop facility's available.
|
| 14th Sep 2014 5:19 pm |
|
|
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
|
1 x module
1 x most cable
1 x power cable
1 x piggy back fuse
and some power and earth cable job done
|
| 14th Sep 2014 6:53 pm |
|
|
