leo6
Member Since: 23 May 2014
Location: Saltburn By The Sea
Posts: 24
  
|
Hi There,
I've been unable to operate my passenger rear door window with either the drivers door button or the rear door button. I've traced the fault to the window motor.
My question is
Once the door card is removed can the motor be removed from the regulator assembly without taking the whole assembly out of the door.
Advice would be most appreciated.
|
 11th Jul 2014 3:34 pm |
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
 
|
not sure but I don't think so. I have a spare motor and assembly out of my 06HSE
http://disco3.co.uk/forum/topic91026.html?highlight=%2Bwindow Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
| 11th Jul 2014 3:40 pm |
|
|
disco5
Member Since: 23 Dec 2012
Location: birmingham
Posts: 1088
|
hi there
Once door cards off couple of torx screws to undo then pull motor off.
Hold on to the window though or it can drop down.
If disco dunc hasn't got a motor I have 
|
| 11th Jul 2014 5:40 pm |
|
|
leo6
Member Since: 23 May 2014
Location: Saltburn By The Sea
Posts: 24
|
Thanks guys, something for me to think about
|
| 22nd Jul 2014 1:25 pm |
|
|
leo6
Member Since: 23 May 2014
Location: Saltburn By The Sea
Posts: 24
|
My thinking is, I probably will never use that window so for now i'll leave it. I'm sure there will be sometime in the future when the door card will need to come off for some other reason. I could do it then.
|
| 22nd Jul 2014 1:28 pm |
|
|
