Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Technical (D3)

Limp Mode
Post Reply  Down to end
Page 1 of 1
Red Defender
 


Member Since: 10 Aug 2006
Location: Cornwall
Posts: 29

2005 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3
Limp Mode

Hi All, I have a 2005 D3 which I have had from new. Its done 63K and has more or less been trouble free and still drives really well, until I put the caravan on the back and go up hill. After a long pull up hill I get a bing and the caption 'Engine Management Fault' and it goes into limp mode. Pull into the next layby, turn off and on again and alls well until the next big hill. I have plugged my computer in and it shows an EGR fault. I dont understand why it should only show when pulling the caravan and up hill. Yes thats when the engine is under max load but why should that effect the EGR valve. Or could the problem be something else. Help please. Red Defender  
Post #131442222nd Jul 2014 9:11 am
View user's profile Send private message View poster's gallery Reply with quote
Andy Foster
 


Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551

United Kingdom 2015 Discovery 4 3.0 SDV6 SE Tech Auto Santorini BlackDiscovery 4

Would be best to just blank them off and take it from there.

Andy D4 MY15 SE TECH
D3 gone but never forgotten.  
Post #131442622nd Jul 2014 9:13 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
L319
 


Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2081

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

On full load the EGR valves should be shut, ie no exhaust gas recirculation. If they are jammed and letting any gas through the engine may be running lean on full load and giving the fault.  
Post #131443022nd Jul 2014 9:23 am
View user's profile Send private message View poster's gallery Reply with quote
Red Defender
 


Member Since: 10 Aug 2006
Location: Cornwall
Posts: 29

2005 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3

Ive just connected the computer again and used the data stream mode and looked at the EGR valve positions, on tick over.

Bank 0 14.46

Bank 1 4.7

Not sure what it means but seems to be a big difference Red Defender  
Post #131443822nd Jul 2014 10:11 am
View user's profile Send private message View poster's gallery Reply with quote
jonnybgud
 


Member Since: 18 Dec 2013
Location: Leicestershire
Posts: 397

United Kingdom 2007 Discovery 3 TDV6 GS Manual Java BlackDiscovery 3

I would get an EGR blanking kit off eBay, roughly £15, took me about an hour & a half to do mine following the instructions that came with the kit... The D3 is a different beast now Wink Admin on Facebook Discovery 3 & 4 Ownersgroup

Cambelt, Fuel Pump Belt, Oil Pump & Water pump replaced by Flack

Mods:

D4 Conversion (front & rear)
BAS (Bodsy) remap + EGR Delete
FBH Smart Controller
D4 Screen/Navigation  
Post #131446822nd Jul 2014 10:59 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site