Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
What was this plug for ?
Whilst doing the myriad jobs on my disco I've come across this plug which has melted against the fbh exhaust. What is it and should I be worried that something is now not working ?
Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
13th Jun 2017 10:59 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13854
it's not for ur washer bottle is it.?
don't know if u plugged in a iid if it would show a fault code
13th Jun 2017 12:16 pm
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
Nope. Washer bottle plug still on. I'm guessing it done it a while ago. Iid faults cleared the other week and nothing coming back up then. I cant check anything at the min because I've literally got the car in bits trying to do the cross over pipe. The trouble is I just keep finding more wrong. Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
from what I can make out, looks like it was unused ... top end is the other half of the 2 part connector and has the bit that is meant to hold it out of the way of the FBH exhaust.
Fogs ? assuming you don't have them..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
just had a look on my D4 ... nothing similar visible without dismantling.
how far below bonnet was it ?.
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
13th Jun 2017 12:26 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10502
plug for
TPS
Tyre pressure monitor sensor
13th Jun 2017 12:27 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20784
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
It's behind/below the headlight on the passenger side. I had a feeling it might be an unused plug. Got fog lights and front pdc fitted. It's a hse spec. I believe the fog/pdc harness is driver side also. Maybe a lhd feature ?Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
13th Jun 2017 12:28 pm
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
Ah. Thank you guys. So I can stop worrying about that now and get back to worrying about everything else !
Edit: just noticed the one on the drivers side.
Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
13th Jun 2017 12:30 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13854
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum