Member Since: 23 Oct 2013
Location: Peebles
Posts: 65
Part found in engine... Anyone recognise??
Hi D3
Was working in my Disco last night and after removing the near side EGR I found this bracket stuck behind the EGR inlet manifold pipe ? Anyone recognise?
28th Jan 2014 10:51 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20795
The EGR valve is held on with 3 bolts, and the cooler held on with 1 bolt. The bracket is bolted on with the same bolt that secures the cooler onto the head, and the threaded part on the top of the bracket secures a silver metal pipe, that comes from the CCV breather, down to the turbo intake pipe My D3 Build Thread
Member Since: 23 Oct 2013
Location: Peebles
Posts: 65
Thanks Mike, I had noticed the bracket on the pipe support missing to the cooler and thought that was what it was replaced by a cable tie, fitted perfectly but better thought better to make sure incase it happened to be for something else.... Just got the Top near side bolt to remove on my crossover pipe then it is all free, hopefully I can feed the pipe out, there's not much room between the pipe and the bulk head tho, may still need to call on your services! Will drop u a PM later.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
