HALLY
Member Since: 10 Jan 2014
Location: Hartlepool
Posts: 6
![](templates/vbnew/images/spacer.gif)
|
I'm trying of get at the wiring loom to repair my central locking keys, I've removed kick plate covers but I can't get the plastic cover out that runs the length of the car over the loom, do I need to remove the passenger seat ?
Help!
|
10th Jan 2014 5:57 am |
|
|
motolite
Member Since: 18 Mar 2013
Location: Sydney
Posts: 931
![](templates/vbnew/images/spacer.gif)
|
I'm not sure if I'm on the right track here, however when I had to remove the plate to get to the wiring loom to run a cable front to back I did the following: put front seat back, undo front clips,put seat forward undo rear clips, remove part of the B pillar trim and then slide plate it out thru the back passenger door. I didn't remove any seats.
|
10th Jan 2014 9:22 pm |
|
|
HALLY
Member Since: 10 Jan 2014
Location: Hartlepool
Posts: 6
![](templates/vbnew/images/spacer.gif)
|
Thanks for that, i tried it yesterday and managed to find the wire, all is well for now.
|
11th Jan 2014 9:07 am |
|
|