Member Since: 27 Sep 2013
Location: Aberdeen
Posts: 6
Adaptive Headlight Query
Greetings - I have a Feb 2012 Discovery 4 HSE and would like to add the Static Cornering and Adaptive headlight functionality to it. It seems as though the headlight clusters have all the necessary lenses, so my question is - is it possible to add this upgrade and if so what parts do I need ?
27th Sep 2013 9:01 am
kathk
Member Since: 06 Jul 2013
Location: far away
Posts: 41
Shouldn't that be standard on a HSE?2012 D4 SDV6 HSE - Heavy Duty, Alpine Roof, Sidesteps, modded LR RAI, Stebel Nautilus, Trailer hitch cargo carrier - Best Car I've ever owned
2013 Mercedes GL500 - Iridium Silver - The Missus' car <- new A/C right after purchase, new motor mounts after 40k km. No problems with the Disco whatsoever.
27th Sep 2013 11:20 am
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50978
No it's an option 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
27th Sep 2013 11:48 am
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
No it was a £305 optionCheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
27th Sep 2013 11:51 am
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Beaten by DG Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
27th Sep 2013 11:53 am
DigitalJunior
Member Since: 22 Nov 2008
Location: Cumbria
Posts: 4401
Standard on my D3 HSE
27th Sep 2013 12:49 pm
garryc
Member Since: 08 May 2007
Location: Adelaide Hills
Posts: 259
Adaptive lamp
Have you sorted it yet? If not unplug the large connector behind one of the headlamps. The pin numbers looking into the plug should be marked either side of the pins or on the back of the connector in very small notation. If not marked then Pin 1 is on the RH side of the top 3 pins, Pin 4 below on the next lower row. See if you have a wire in Pin 4 and Pin 16. If so then the wiring is there for the lamp from the Central Junction Box. Try fitting a lamp. If that doesn't work it might need a software upgrade. regards garryc2013 D4, E-diff, Vision pack
Never propose to a Yak
11th Nov 2013 8:48 am
B McP
Member Since: 27 Sep 2013
Location: Aberdeen
Posts: 6
Thanks garryc - I will take a look at that.
15th Nov 2013 2:44 pm
B McP
Member Since: 27 Sep 2013
Location: Aberdeen
Posts: 6
Garryc - I did (finally) get time to look at the connector and 13 of the 16 pins are wired on the wiring loom end (including 4 & 16), but only 8 are wired in the headlamp connector. It looks like the headlamp connector is an inter-changeable unit - perhaps landrover fit differently wired connectors for the different variants of lighting options.
3rd Jan 2014 8:48 am
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Search BBS conversion as I have just done this on the thread for my D3 to D4 conversion, corner lights anyway as the AFS requires a full wiring loom from factory or many hours of adding to engine bay, easy to follow on the thread
Member Since: 27 Sep 2013
Location: Aberdeen
Posts: 6
Thanks Rob - I will read through what you have done in detail and respond with any questions that spring up if I may.
3rd Jan 2014 7:41 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
digitaljunior wrote:
Standard on my D3 HSE
Are you sure that the first owner didn't spec it as an option as I don't recall it being standard?Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
