pshawfocus
Member Since: 29 Jun 2013
Location: Croydon
Posts: 73
  
|
Hi All
A question about the black plastic body protection trim which is held on with some sort of popper. The piece which is on the offside rear of my D3 around the rear wheel arch is a tiny bit proud (say 2-3mm) of the body almost all the way around, like it needs to be pushed home to seal against the bodywork. I have given it a few moderate taps with my fist / palm of my hand but it's not moved. Does it simply need more of a firm thump or should I do/try something else?
|
 26th Dec 2013 5:40 pm |
|
|
Mash
Member Since: 24 May 2012
Location: Vale
Posts: 292
|
I would take it off and make sure none of the locating pins are bent and that they are seated correctly, I know the front ones also have 2 tabs that slide between the wing and the inner arch, it could be one of those was miss aligned when last installed.
|
| 26th Dec 2013 8:41 pm |
|
|
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
  
|
Yup take off to make sure but will need a good final thump to push home. “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| 27th Dec 2013 1:46 am |
|
|
