Member Since: 12 Dec 2012
Location: Middletown, Rhode Island
Posts: 367
p0171, p0174 after I changed my t elbow
Ok, so my little t-elbow bleeding thingamigigy cracked and antifreeze went everywhere, luckily I was only 1 mile from my house. I happened to have a extra one and I replaced it and bled the system. Soon after, the codes p0171, p0174 popped up. Cars running fine, temp is around 185-195. I cleared the codes but they came back up a few miles later. Anyone????
Narpy's Grill Mod, Suspension Rods, Ultra guage, wrangler Goodyear duratracs 265/60/18, new thermostat, diff oils changed, brake switch new, aluminum rack floor, LED driving lights in foglights, rear camera, just need gvif unit, next on list! New front arb bushings, new front valve block, 191,000 miles.
22nd Nov 2013 3:57 am
Oswiperus D3 Decade
Member Since: 02 Apr 2010
Location: Chelmsford, Essex
Posts: 1595
P0171- system too lean (bank 1)
P0174- System too lean (bank 2)
From Bell auto services website fault code checker.
Stu
22nd Nov 2013 8:14 pm
mx468
Member Since: 12 Dec 2012
Location: Middletown, Rhode Island
Posts: 367
Why would the system be too lean after I replaced the t elbow bleeder? Do you think it could be a vacuum leak, possibly at the elbow? I had to cut the rubber to reattach to the new bleeder, both ends.Narpy's Grill Mod, Suspension Rods, Ultra guage, wrangler Goodyear duratracs 265/60/18, new thermostat, diff oils changed, brake switch new, aluminum rack floor, LED driving lights in foglights, rear camera, just need gvif unit, next on list! New front arb bushings, new front valve block, 191,000 miles.
22nd Nov 2013 8:22 pm
Oswiperus D3 Decade
Member Since: 02 Apr 2010
Location: Chelmsford, Essex
Posts: 1595
Perhaps it's unrelated but I'm afraid I know very little about the petrol engine. Come to think of it, I don't know much more about the diesels!
22nd Nov 2013 9:10 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
check for air leak at and after the air mass meter, its reading to low a flow, hence weak fuel level,
try giving it a clean and re check all flexible joints at the jubilee clips FFRR SC 4.2
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum