Member Since: 23 Oct 2013
Location: Peebles
Posts: 65
EGR questions
Hi D3
Couple questions about EGR valve
1. As I have removers my right EGR "far side" because the joint between the cooler and the EGR was leaking can u get a pipe set to connect the hoses etc up rather than replace the EGR cooler unit?
2. Also would this leak between the EGR and cooler sound like a blown exhaust gasket, I got that noise but only when driving and would start 1500rpm?
Thanks for any advise, am sure anyone who has removed one of these knows how tricky they can be.
Regards Kyle.
21st Nov 2013 10:11 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20784
You can blank them at the rear of the manifold, to effectively do away with the coolers
No-one makes blanking plates for the manifolds, I had to make up my own plates, using a gasket as a template.
Member Since: 23 Oct 2013
Location: Peebles
Posts: 65
Cooler manifold!... Misunderstood what U said before! That's what I will do.
so would a leak from there sound similar to a popped exhaust? Did u put a bracket on the cooler manifold end or did the hoses hold it ok ? Final
Question I promise!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum