Member Since: 22 Dec 2020
Location: Wiltshire
Posts: 4
Thermo test software not initialising. No data pin 2?
I have a webasto from a Freelander which works perfectly as a standalone heater when set up on the bench. But it will not communicate with the Webasto Thermo Test software, never completing initialisation despite buying a second set up.
The comm port is working, I'm connected to pin 2, have even set the latency down to 1 as recommended on another site.
Anyone have any other ideas that I could try? Thanks
22nd Dec 2020 12:06 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18510
Selected "Thermo Top C/Z Rover" from the device menu?
Have you got ground connected to pin 4 and 5 of your OBD adapter?
What OBD adapter do you have?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
22nd Dec 2020 12:12 pm
Rozzer
Member Since: 22 Dec 2020
Location: Wiltshire
Posts: 4
Member Since: 22 Dec 2020
Location: Wiltshire
Posts: 4
Hi Martin, as simple as that, just had to select the Thermo Top C/Rover!
Does that mean I wouldn't be able to put this into a Peugeot as a direct replacement for a faulty unit? I'm still building my knowledge on these units and from what I can work out some manufacturers have their own configuration (either in hardware or software?).
Do you know if it's possible to reprogamme a unit for one car manufacturer to another? If not, I presume I can just swap the control boards.
James
22nd Dec 2020 5:52 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18510
Not as helpful as me though, eh
Especially as it's basically a copy of my kits, plus he's completely copied my instructions
Shame you spent the money on his kit not mine, but I end up doing the support. Hey ho.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
22nd Dec 2020 6:07 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
@rozzer...
May i ask if you have a Land Rover? As Discovery‘s do not have thermotop C‘s
Only TT V or and Evo
Regarding other questions.... no will not fit a peugeot
Software is car specific in this case... (as with all „zuheizer“ labeled webasto and eberspacher... units...)
Only a few will start on other motors (like the D3 ones) but then only limited... so no telestart option...
Stay away from branded units, unless you know what you are doing...Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
22nd Dec 2020 11:57 pm
Rozzer
Member Since: 22 Dec 2020
Location: Wiltshire
Posts: 4
It's from a Freelander
And Martin: wish I'd discovered your site earlier. I have just ordered a few bits from you yesterday though.
Thanks for all the help and support both.
23rd Dec 2020 12:23 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18510
The Freelander TTC is pretty good as it'll run standalone from 12V on/off, without a car attached
Whether or not it'll replace a Peugeot unit depends on how the Peugeot is controlled.
But assuming (big assumptions coming up) the Peugeot controller still works AND is compatible with the Freelander TTC unit itself, this could be swapped onto the Freelander unit to make it talk Peugeot!06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
23rd Dec 2020 1:32 pm
leroymusic00
Member Since: 12 Jan 2021
Location: Carlisle
Posts: 143
Martin wrote:
Not as helpful as me though, eh
Especially as it's basically a copy of my kits, plus he's completely copied my instructions
Shame you spent the money on his kit not mine, but I end up doing the support. Hey ho.
Hi Martin
I've just taken delivery of my USB FBH unit. I've set it up as per the instructions and the software isn't recognising any that I select from the diagnostic page. Any ideas?
15th Mar 2021 1:34 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18510
Follow this page from the "Drivers" section and into "Adapter Configuration" to get the COM port set up.
Member Since: 12 Jan 2021
Location: Carlisle
Posts: 143
FBH
Hi Martin,
Nothing seems to be going right here - I've tried looking for COMS ports and it's not there on my PC.
I've downloaded all the drivers options and nothing. The blue wire has also just popped out as I was putting it away, I've tried all day with it.
15th Mar 2021 3:06 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18510
The "USB Serial" device with the question mark shows the driver is not installed.
Member Since: 12 Jan 2021
Location: Carlisle
Posts: 143
FBH
Hi Martin
I have done that and it won't open. How do I repair the blue wire? Should I just solder and click back in?
I am solely on Macs but I'm using an old laptop with Windows XP. The Webasto software has downloaded fine and the blue USB is lighting up with the red LED. I just cannot seem to get it link up with the COMS thing. It's not giving me that option.
15th Mar 2021 3:27 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18510
"Won't open" can mean many things - can't download it, can't find it after download, getting an error after download??06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
15th Mar 2021 3:28 pm
leroymusic00
Member Since: 12 Jan 2021
Location: Carlisle
Posts: 143
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum