heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
  
|
|
 19th Feb 2008 6:03 pm |
|
|
Rencolyn
Member Since: 26 Feb 2008
Location: Knysna
Posts: 212
|
I adjusted my PDC today but the existing slots were at the bottom of the hole, not as the previous pics show at the top. I drilled new slots to move the PDC 45 degrees & it works fine. I now get full alarm at 150mm, a bit close but ok. See my gallery.
One point of caution... when refitting the bumper, ensure that all 4 PDC units fit into the metalwork holes before securing the bumper. My outer one was not & it broke the plug assembly. Amazing what epoxy glue can fix! 
|
| 10th Mar 2008 11:08 am |
|
|
Jamo
Member Since: 18 Jan 2006
Location: Esperance, Western Australia
Posts: 1170
|
The pics in my gallery show the adjustment for the Kaymar bumper.
I broke one of the sensors when i was adjusting them, but the replacement was only about A$14 from memory. Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
|
| 11th Mar 2008 6:43 am |
|
|
noel
Member Since: 06 Mar 2011
Location: KwaZulu-Natal
Posts: 48
 
|
heine wrote:FWIW I found that Prestik doesn't handle the weather that well . I have now redone the Prestik bit with silicone sealer , and it also blocks the sensor and should be a lot harder wearing
thanks for that, you saved me stripping everything. I have used prestik with success for my rear wheel carrier but noticed since going to the swamps and after each car wash it became a problem. I thought it was mud and moisture behind the bumper but will try replacing the prestik. Mvubu 2014 Discovery 4 TDV6 XS, Corris Grey.Snorkel, OL Bull Bar, Winch,OME Heavy Duty Coil Springs,Light Guards,17" Black Wheels,Cooper ST max,Dual Battery+Inverter,Drawer Storage,FR Rear Ladder,Hannibal Roof Rack,80L Excel Long Range Fuel Tank,HiLift Jack Points,75L Water Tank.
Previous Kubu 2006 Discovery 3,
Previous 2007 Defender Puma,warranty replaced 2008
Previous Discovery 2
Previous Discovery 1
|
| 19th May 2012 4:58 pm |
|
|
