Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Faults & Fixes (D4)

Tailgate upper not opening
Post Reply  Down to end
Page 1 of 1
adahutch
 


Member Since: 31 Jul 2016
Location: kenilworth, warwickshire
Posts: 11

United Kingdom 2010 Discovery 4 3.0 TDV6 HSE Auto Zermatt SilverDiscovery 4
Tailgate upper not opening

Can anyone help, I thought i had the same issue as described many many times on this forum, I could not open the upper tailgate so i stripped out the interior and managed to activate the latch so the boot was open.
I went out and purchased a new actuator £54 from craddocks, fitted but still not working.

checked the micro switch which seems to be working but not totally sure how to check completely.
checked the fuses and can't find any gone.

Now i don't know what to try next.

Please you clever ones out there what do i check next????
Adrian.
  
Post #17154034th Oct 2016 6:56 pm
View user's profile Send private message View poster's gallery Reply with quote
furnitureman
 


Member Since: 30 Apr 2015
Location: Stoney Stanton, Leicestershire
Posts: 1529

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Lugano TealDiscovery 3

Im not an expert but i had a similar problem on my D3 that turned out to be a defective micro switch in the door, i was able to unlock the tailgate using the lock/unlock switch on the dash i know they have moved this on the d4 i then set the third button on my remote to open the top tailgate if the switch ever played up not sure if any of this is helpfull hopefully someone with more info will come along and help
 Range Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
 
 
Post #17154124th Oct 2016 7:03 pm
View user's profile Send private message View poster's gallery Reply with quote
adahutch
 


Member Since: 31 Jul 2016
Location: kenilworth, warwickshire
Posts: 11

United Kingdom 2010 Discovery 4 3.0 TDV6 HSE Auto Zermatt SilverDiscovery 4

thanks for the reply. There are no dash switches for the D4 which is a real pain. I have boot oper on my keyfob but i have no idea if it works because i have never used it, as long as i have the key in my pocket i can open any of the doors or boot. Do you know if you need to program the key fob???
I leaning towards the micro switch in the handle but i have no real idea how to test it, i can hear it click but does that mean it's o.k. There was quite a lot of decay when i took the rubber cover off??.
  
Post #17154374th Oct 2016 7:31 pm
View user's profile Send private message View poster's gallery Reply with quote
furnitureman
 


Member Since: 30 Apr 2015
Location: Stoney Stanton, Leicestershire
Posts: 1529

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Lugano TealDiscovery 3

The central locking button is on your drivers door i think,if you use the button on the remote to open the boot and it opens it, keep it open then close the locking latch that would lock onto the latch on the lower tail gate and try the handle switch if nothing happens its the switch they are a bad design as water gets in and corrodes them i removed mine cleaned and sprayed with WD40 then re fitted and it worked great but after 6 nonths there was new corrosion thats why i set up the third button on my remote, i dont have any knowlege of the D4 remote but if your remote opens it, if its like mine you have to be holding the handle when you press the remote and pulling open at the same time hope this helps
 Range Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
 
 
Post #17154474th Oct 2016 7:45 pm
View user's profile Send private message View poster's gallery Reply with quote
furnitureman
 


Member Since: 30 Apr 2015
Location: Stoney Stanton, Leicestershire
Posts: 1529

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Lugano TealDiscovery 3

have a look through this thread may be useful

http://www.disco3.co.uk/forum/topic130214....ate+switch
 Range Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
 
 
Post #17154494th Oct 2016 7:49 pm
View user's profile Send private message View poster's gallery Reply with quote
adahutch
 


Member Since: 31 Jul 2016
Location: kenilworth, warwickshire
Posts: 11

United Kingdom 2010 Discovery 4 3.0 TDV6 HSE Auto Zermatt SilverDiscovery 4

i can hear the micro switch click but should i assume its working???
  
Post #17154654th Oct 2016 8:01 pm
View user's profile Send private message View poster's gallery Reply with quote
furnitureman
 


Member Since: 30 Apr 2015
Location: Stoney Stanton, Leicestershire
Posts: 1529

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Lugano TealDiscovery 3

Only way to test is to do the closing the lock and trying the switch to see if it opens
 Range Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
 
 
Post #17154934th Oct 2016 8:31 pm
View user's profile Send private message View poster's gallery Reply with quote
adahutch
 


Member Since: 31 Jul 2016
Location: kenilworth, warwickshire
Posts: 11

United Kingdom 2010 Discovery 4 3.0 TDV6 HSE Auto Zermatt SilverDiscovery 4

so here's the pain in the butt. Changed the actuator and the micro switch but still no joy the boot just won't open. - anybody got any ideas???
  
Post #171994514th Oct 2016 6:03 pm
View user's profile Send private message View poster's gallery Reply with quote
robpenrose
 


Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2138

United Kingdom 2010 Discovery 4 3.0 TDV6 HSE Auto Stornoway GreyDiscovery 4

Have you started the car whilst doing any of this?

I fitted a new actuator yesterday. Didn't work. Checked everything and still nothing.

Started the car and moved it back into the parking space and started work. Put it all back together and all been fine. Don't know why it didn't work straight away. Maybe it needed the ignition to be cycled or system check.

See my post here: http://www.disco4.com/forum/topic149398.html

Post updated by me towards the bottom
 

Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES 
 
Post #171996114th Oct 2016 6:27 pm
View user's profile Send private message View poster's gallery Reply with quote
adahutch
 


Member Since: 31 Jul 2016
Location: kenilworth, warwickshire
Posts: 11

United Kingdom 2010 Discovery 4 3.0 TDV6 HSE Auto Zermatt SilverDiscovery 4

so today I have had a good look at this problem - Actuator over a slave battery works fine and is brand new.
Switch in tailgate is brand new.
The issue that I have is that there is only 9.5v one side of the switch and what seems to be a fault to ground the other site.
9.5v is not enough to fire the actuator so even if I cut out all the wiring in the tailgate I still can't get the actuator to fire????
Has anybody any ideas.
Adrian.
  
Post #172049316th Oct 2016 12:55 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site